Dry Sump installooo

thebigslide

Registered User
I'm installing a dry sump oil pump on my 302 (sorry), but I figured the thread would also be applicable to SCs. I've never done this before, although I have a pretty clear understanding of how it works. I have a 6-stage pump. I have one line sucking oil from each pan sump and going to the tank, one line from each head going to the tank for return. Then I have one line feeding wrist pin sprayers from the tank. My questions is in regards to the 6th line. I need to feed the main oil system from the tank. Can I plug the internal pump oil pressure hole and just tap a hole into any old oil galley to feed the system, or is there a preferred way to do this?

Am I missing anything else before I fire my baby up again?
 
Back
Top