intake

fastsc92

Registered User
Where can i get info on the MAC intake.....BBK intake...or ZR motorsports intake...cold air kit. I was going to get one soon...i saw the one on ebay..but i heard its bad to have a bend before the MAF. I might make my own...using 3.5" aluminum tubing and polish it...just bolt the filter right to the MAF.....what do you guys think?
 
the reason you use one of these is to give the motor cold outside air, not hot engine air. It's a bad idea to just put a filter on the MAF, it might "flow" better, but all you will get is hot air from the motor. I have a MAC, and yes it has bends, but it works GREAT for me. IMO it's the best CAI for the money. It works just fine if your car is "bolt on modified"or stock...I mean if I was pushing 350-400 hp, I'd think about something bigger, and better, but for what I have, it works great. The MAC relocates the filter into the fender well which pulls the air from outside the motor compartment. Check the other post on this subject as well. Good luck!
-Jeff
 
Back
Top