PDA

View Full Version : Changing Bulb in gauge cluster?



Joe90SC
11-30-2004, 02:23 PM
I have a 1990 SC and was trying to find out how difficult it is to change a bulb in the gauge cluster? The bulb behind my speedometer and temperature gauge are burned out. Any help would be greatly appreciated!

Thanks,
Joe Russo

wongy
12-01-2004, 04:39 AM
Its not that hard. all you got to do is remove the black trim piece & it is hold together by 2 screws on the top.Next remove the 6 or7 bolts that hold the cluster in place and i think the bolts are 8mm.And you should be able to just pull it out. :)

Joisey Jim
12-02-2004, 02:11 PM
When you remove those 6/7 little torx head bolts that hold the main cluster in place, make sure you use something magnetic to finally remove each bolt - because if you drop one behind/underneath the cluster, they are a pain to recover.