Replacement of Turn Signal Switch?

Joe90SC

Registered User
I found out that I have to replace my turn signal switch, which is the whole stalk on my 90 SC. Since it is affecting my high beams and headlights. So I wanted to know how difficult it is to replace?

Thanks,
Joe Russo
 
its pretty easy. use a phillips to loosen the screws that hold the upper and lower steering column covers. theres a collar that goes around the column right behind the steering wheel. just pull it straight out from the left side. it just clips in. then all you need is a 6 or 8mm socket, cant remember which, and a flat head screwdriver to pop the harnesses off. there are two bolts that hold it in. loosen those and it comes right out.
 
Back
Top