Opinions on these SuperHeads

[MagpoweredSC]

I was looking at these SuperSixMotorsports.com's super heads before and the more i look around and research prices, the more appealing these heads look. For the price i don't think there is much of a comparison for the more expensive alternatives. There is a 3.8 mustang with these heads making 434 rwhp and 424 rwtq with a centrifugal blower at only 14lbs of boost. So it seems that they flow good. What do all of you guys think for $1100?

Here is the flow charts superheads (our style) vs ported split ports.

[Conan56]

You should ask them if they offer a discount
If 3 or more sets are purchased

[Toms-SC]

A member here had a very bad experence with SuperSixMotorSports and does not suggest you deal with them. :)

[Shockwave]

I would want them to port a set of SC heads instead of N/A heads, but I assume that if you sent them the cores it wouldn't be a problem. These are much cheaper than Steg.

Jerrt

[MagpoweredSC]

it says on their website that they do supercoupe heads.
Here is their website check it out. (http://www.supersixmotorsports.com)
I want to find out if they can put 1.60" exaust valves that would put the exaust up more. And i would want some higher lift valve springs, but they said they can customize their orders.

[tim]

Unless they have done a lot of S.C. heads I would not let them port mine. More harm than good can be done.

[XR7 Dave]

These are much cheaper than Steg.

Jerrt

No they aren't. You get what you pay for. I can get you non welded Steig heads for the same price.

[DamonSlowpokeBaumann]

The one advantage those later model 3.8 heads have is the lighter valvetrain componants..besides that the castings are near identical minus two intake bolt holes