392Bird
Registered User
I wanted to move my MSD Digital 6 plus to the inside of the car to get it away from heat, to prevent and chance of it getting wet, and to provide easy access. I also wanted to make it easy to remove while doing any welding on the car. I wanted it to be out of the way, so I decided to put it in the dash mounted glove box area. This will help clear up the engine compartment for future work also.
Here is a shot of it.
It is mounted on lucite. To remove, I just lift it off the mounting studs, and unplug the 2 quick disconnects. I made it a little large to provide room for other controls in the future.
http://members.tccoa.com/392bird/ignition.htm
Here is a shot of it.
It is mounted on lucite. To remove, I just lift it off the mounting studs, and unplug the 2 quick disconnects. I made it a little large to provide room for other controls in the future.
http://members.tccoa.com/392bird/ignition.htm