Parting out 95SC

[cowboyup20x]

I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.

[Kris Campos]

How much would you want for the rear tail lights?
-Kris

[Kris Campos]

Oh, and how much for the speedo?
-Kris

[z90sc]

.u got a pm...............
z

[cowboyup20x]

I also have the original MAF, air box, and auto ride suspension parts. I also have two 2 1/2" Magnaflow SS Hi-flow cats and two 2 1/2" SS straight thru mufflers.

[Azreael344]

Private message sent

[Brando B]

Do you have the folding rear seats and if so, what color is it and what is it's condition?? Also, how much do you want for the kooks headers and the two 2.5inch SS high flow cats? Could you send pic for all these parts to:

IOULots@aol.com

Thanks,
Brando

[SloMo228]

Was the car an auto or manual? If it was an auto, how much for the console top, handbrake lever and cable to 48088? Thanks.

[SloMo228]

Oh, and how many miles are on the Koni's?

[silver92]

I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.
if it is a 5 speed i would like the console top

[Azreael344]

if it is a 5 speed i would like the console top

every one of us wants that console top lol

[BLUE95]

Private Message Sent

[SCaddict]

What do you want for the MAF and injectors?

[leeklimala]

Sent you a PM.

[MrBlvd]

Sent Private Message:D

[cowboyup20x]

Oh, and how many miles are on the Koni's?

Koni's are yellow and have 12k miles on them

[cowboyup20x]

The car is an automatic. It has gray cloth and "leather" interior wtih non-folding seats in rear. Most the parts only have 12-18k miles on them. The #6 rod bearing burned up and ate away at the crank. I had the block honed and put in a boiler tank. Rods were machined and crank was turned 20/20. I have been having problems finding main bearings so I am parting it out. I have three other vehicles to maintain.
I will try to get pics. The entire drivetrain is out of the car and disassembled.

[cowboyup20x]

Prices are negotionable and do include shipping.
If there are any other parts, just PM me with ?'s.

Kooks Headers mid length, ceramic coating, egr fitting $450
Magnum Powers Inlet Plenum polished with egr $475
85mmTB $280
SC raised top $260
MSD Dis 4 with tach adapters $280
Eibach Springs $125
Magnaflow Hiflow SS cats $100
90mm Lightning MAF $75
Gauge Cluster $75
Handbrake $60
Auto Console Top $40
BBK Fuel pressure regulator $55

[Azreael344]

You've got another PM

Dips on console top, ebrake handle, and speedo

[quick35th]

pm sent.

Shane

[quick35th]

Oh... how much for the front spindles?

Shane

[peter]

Do you have the two power mirrors. Do they work and the price.
Thanks

[CaifanSC]

Does your 95 have the cell phone option? Im looking specifically for the black trim around the gauge cluster that holds the cell phone buttons.

[cowboyup20x]

Oh... how much for the front spindles?

Shane

PM me an offer.

[cowboyup20x]

Does your 95 have the cell phone option? Im looking specifically for the black trim around the gauge cluster that holds the cell phone buttons.

No it does not.

[cowboyup20x]

Do you have the two power mirrors. Do they work and the price.
Thanks

Yes, yes they work, they are blue. Shipped $45

[peter]

I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.
Do you have the power mirrors. Do they work and how much.Thanks

[cowboyup20x]

I also have the comp limited 80/100 blue bulbs and wiring harness that supercoupeperformance sells if anyone is interested.

[x182dan]

Do you still have the kooks and eibachs?

[cowboyup20x]

Do you still have the kooks and eibachs?

Yes I do. I have also lowered the prices on the headers and springs. I also have the original plenum, tb, and top to the sc.

[joshbea6]

Do you have the center console bottom, the grey piece that attaches to the floor?

I don't need the top, but could use the bottom piece.

thanks,

-Josh

[cowboyup20x]

So far the injectors, tb, and maf are sold. All the sensors on the motor have less then 50miles on them because I replaced them. It also has a new coil pack.

[joshbea6]

how much for the center console piece that I asked about? how much for both center console and top? Shipped to 43220?

Josh

[cowboyup20x]

how much for the center console piece that I asked about? how much for both center console and top? Shipped to 43220?

Josh

I sent you a pm

[joshbea6]

I just sent you one back.....lol

[cowboyup20x]

Here are pics of the sc. The tb is sold.

http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00261.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00262.jpg

[cowboyup20x]

Links for pics of other items. If you want a pic of something, let me know and I'll get you one.

Headlights
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00246.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00247.jpg

Seats
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00240.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00239.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00237.jpg

Door Panels
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00241.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00243.jpg

Taillights/Spoiler
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00257.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00277.jpg

Wheels
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00271.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00269.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00268.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00267.jpg

Kooks
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00266.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00265.jpg

Eibachs with visible P#
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00250.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00255.jpg

[drummerzrok24]

Will the dash fit in a 92SC?

[quick35th]

Will the dash fit in a 92SC?

You have to do some redrilling and get the door pannels too. Other than that some of the wiring is needed too. There was another thread not long ago that had pictures of the differences.

Shane

[cato]

Will the dash fit in a 92SC?

honestly no, the airbags won't work without a FULL conversion, dash, wiring, computer, etc. not trying to sabatoge a sale, its just a LOT to do to go backwards as far as that goes.

[CaifanSC]

I emailed u about the two front seats....possible first dibs on them! Also, what are ur asking for the drivers side airbag. Also, did ur car come with premium sound? Im looking for the harness that goes from the head unit to the back of the amp, and the 4 speakers...whats ur price?

[Azreael344]

Ok i figured out what parts i need. I sent you a PM U've got a deal

[cowboyup20x]

So far the MAF, TB, Injectors, Gauge cluster, Ebrake, entire console, mirrors, and corner taillights are sold.

Prices are negotionable and do include shipping.
If there are any other parts, just PM me with ?'s.

Kooks Headers mid length, ceramic coating, egr fitting $450
Magnum Powers Inlet Plenum polished with egr $475
SC raised top $250
MSD Dis 4 with tach adapters $280
Eibach Springs $125
Magnaflow Hiflow SS cats $100
BBK Fuel pressure regulator $55

[cowboyup20x]

I have updated post 37 with some new pics.
http://www.sccoa.com/forums/showpost.php?p=356125&postcount=37

If you wants pics of something or need something just pm me. Here are some pics of the ext of the car. If I haven't sent you pics that you asked for, just give me a reminder. Thanks

http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00284.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00288.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00285.jpg
http://img.photobucket.com/albums/v614/cowboyup20x/tbird/DSC00277.jpg

[eron94sc]

you have pm

[TwoToneThunder]

why are you parting it out the cars beautiful

[quick35th]

why are you parting it out the cars beautiful

I wanderd the same thing but didn't ask.

Shane

[cowboyup20x]

I have put alot of time and money into it, but I just don't have the time for two project vehicles anymore. It spun a bearing and it has been a hassle to find 20/20 crank bearings for it, so I'm just parting it out.
I already had all the motorwork done and all new sensors bought, but no luck with main bearings.

[cowboyup20x]

So far the MAF, TB, Injectors, Gauge cluster, Ebrake, entire console, mirrors, corner taillights, and Prem sound/wiring harness are sold.

Prices are negotionable and do include shipping.
If there are any other parts, just PM me with ?'s.

Kooks Headers mid length, ceramic coating, egr fitting $450
Magnum Powers Inlet Plenum polished with egr $475
SC raised top $250
MSD Dis 4 with tach adapters $280
Eibach Springs $125
Magnaflow Hiflow SS cats $100
BBK Fuel pressure regulator $55

[JeffTBird93]

How much for the power antenna shipped to 25430? Actually, how much for just the antenna shaft and the plastic gear cable thing that goes inside the shaft...assuming that it works and isn't broken...and you'd be willing to sell just those pieces?

[victor malvar]

Hi Cowboy
I see that there may not be much left... Email me at
Spinningwheels-scW@earthlink.net and tell me whats left.
I'm very Interested in the complete console, speedo But in particular the rear diff. engine, YB and more. I'm in a buying mood. The quicker the better and I will pay quick. It has to be in good condition. I'm iterested in alot of things.
Happy Hollidays :)
Victor and Diane

[cowboyup20x]

Updated sold list

So far the MAF, TB, Injectors, Gauge cluster, Ebrake, entire console, mirrors, corner taillights, rear bumper, side skirts, Eibach springs, air bags, and Prem sound/wiring harness are sold.

Prices are negotionable and do include shipping.
If there are any other parts, just PM me with ?'s.

Kooks Headers mid length, ceramic coating, egr fitting $450
Magnum Powers Inlet Plenum polished with egr $475
SC raised top $250
MSD Dis 4 with tach adapters $280
Magnaflow Hiflow SS cats $100
BBK Fuel pressure regulator $55

[quick35th]

Sent you a pm.

Shane

[cowboyup20x]

Updated sold list and prices!!

So far the MAF, TB, Injectors, Gauge cluster, Ebrake, entire console, mirrors, corner taillights, rear bumper, side skirts, Eibach springs, air bags, Prem sound/wiring harness, EGR valve & tube, and power antenna are sold.

Prices are negotionable and do include shipping.
If there are any other parts, just PM me with ?'s.

Kooks Headers mid length, ceramic coating, egr fitting $400
Magnum Powers Inlet Plenum polished with egr $425
SC raised top $200
MSD Dis 4 with tach adapters $250
Magnaflow Hiflow SS cats $100
BBK Fuel pressure regulator $45

[Andy 94SC]

I can't beleive this car is getting parted out either!

Would you consider selling the whole body to someone looking for a project? I assume the title is OK... Where are you located?

[cowboyup20x]

I can't beleive this car is getting parted out either!

Would you consider selling the whole body to someone looking for a project? I assume the title is OK... Where are you located?

If someone wants the car, I'm in beaufort SC. I will be taking it to the local salvage yard in the end of Jan. So if you want parts from it, or the entire shell, or something else let me know. The title is good, car has never been wrecked. If someone wants it pm me.

[scscrounger]

How much for the headers and/or the rest of the exhaust? thanks.

[cowboyup20x]

Updated sold list and prices!!

So far the MAF, TB, Injectors, Gauge cluster, Ebrake, entire console, mirrors, corner taillights, rear bumper, side skirts, Eibach springs, air bags, Prem sound/wiring harness, EGR valve & tube, power antenna, Kooks headers, MP inlet, and the Koni shocks are sold.

Prices are negotionable and do include shipping.
If there are any other parts, just PM me with ?'s.

SC raised top $200
MSD Dis 4 with tach adapters $250
Magnaflow Hiflow SS cats $100
BBK Fuel pressure regulator $45

[1990redSC]

I sent you a PM :)

[Greg Coleman]

How much for the spoiler?

[CaifanSC]

Has anybody heard back from him? Been a while.

[JeffTBird93]

Haven't heard from him, but I got my antenna last week.

[Thunder95]

I haven't heard from him in about a week. I'm still waiting on the bumper cover and skirts. I imagine he's just busy with X-mas or something ...hopefully. Cowboy, shoot me an e-mail if you see this
Steelblue2001@hotmail.com
-Joel

[brogdon420]

do you still have the wheels for the car, and if so how much for one for the right side?

[Azreael344]

i don't think he's too interested in selling parts from this car anymore. he was supposed to email me when he had the parts pulled that i wanted..........needless to say its been weeks

[Nettlesd]

I need the tensioner assembly that goes by the alternator. If you have one, let me know.

[Greg Coleman]

I would like to see the spoiler off the car.

[Azreael344]

Whats the deal man. You were supposed to let me know when you had the parts i wanted, console, ebrake assembly, and instrument cluster, pulled so i could pay you and you could ship them. Its been weeks I want to know what the hold up is.

[cowboyup20x]

First of all, I would like to appologize to everyone. I know I have been hard to reach lately with it being the holidays and all. I'm in the USMC, and we have been gearing up the last couple of weeks. I have been working 12+hr days and weekends. I'm sorry I haven't replied to emails to those of you that have purchased parts from me.
I will be shipping out the parts that have been paid for tomorrow morning. You should all receive these by the end of the week. If you do not, please email me @ cowboyup-n-carolinagirl@earthlink.net I will email out your tracking numbers tomorrow night when I get home from work.
I will try to update the list of remaining parts and answer all the emails I have received during the last couple of weeks. I didn't not mean to anger anyone or make them feel cheated.

[SCme]

Hey don't worry about it. I sent you and email about the cats and fuel regulator. Just when you get time give me a reply at my email (newcoms@bellsouth.net)

You gearing up for Iraq? Doesn't matter, just be safe out there.

Tim

[94scoupe]

I am looking for clear headlights and sides. If you have them let me know and how much at occc@srskansas.org

[dougf]

Hey there,

I am still waiting on the springs & the rear air bag. I have not recieved the tracking numbers. I really need to put my T-bird back together as soon as possible. It's been maybe 4 weeks?, since we first worked out the deal. I need to know if you can get the springs to me as soon as possible or should I just go & buy a new set? IT IS MOST URGENT that I get my T-bird put back together.

Let me know one way or the other,

Thanks,

Doug

[Azreael344]

First of all, I would like to appologize to everyone. I know I have been hard to reach lately with it being the holidays and all. I'm in the USMC, and we have been gearing up the last couple of weeks. I have been working 12+hr days and weekends. I'm sorry I haven't replied to emails to those of you that have purchased parts from me.
I will be shipping out the parts that have been paid for tomorrow morning. You should all receive these by the end of the week. If you do not, please email me @ cowboyup-n-carolinagirl@earthlink.net I will email out your tracking numbers tomorrow night when I get home from work.
I will try to update the list of remaining parts and answer all the emails I have received during the last couple of weeks. I didn't not mean to anger anyone or make them feel cheated.

Email and PM sent.

[no164ford]

I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.

what size are the headers and how much?
email no164ford@yahoo.com

[no164ford]

I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.

what magnum parts do you have

[FastSC]

I am intrested in wheels and tires. Please email me with condition and price to bjherron@sctflash.com

Thanks,
Brian

[white94sc]

Wondering if you still have the headlight assemblies. Also do you have the fog light switch on the center dash. and I would also like to buy your headlight conversion " also have the comp limited 80/100 blue bulbs and wiring harness that supercoupeperformance sells if anyone is interested." and fog lights. Name your price and I can pay through paypal if it makes the transaction easier.

[jayj@fastfab]

I'm looking for one or more 95 style sc wheels. Do you still have yours and what are you asking for them. Also can you ship?

[victor malvar]

First of all, I would like to appologize to everyone. I know I have been hard to reach lately with it being the holidays and all. I'm in the USMC, and we have been gearing up the last couple of weeks. I have been working 12+hr days and weekends. I'm sorry I haven't replied to emails to those of you that have purchased parts from me.
I will be shipping out the parts that have been paid for tomorrow morning. You should all receive these by the end of the week. If you do not, please email me @ cowboyup-n-carolinagirl@earthlink.net I will email out your tracking numbers tomorrow night when I get home from work.
I will try to update the list of remaining parts and answer all the emails I have received during the last couple of weeks. I didn't not mean to anger anyone or make them feel cheated.
Hi Cowboy, My Son is also getting ready to ship back out! He is flying the Chinook Ch46D they are short of Chinook pilots, his second tour. I would like to replace the 95 style front headlight and bumper section ect. If you have the whole section I would be very Interested please PM me. Or email me at spinningwheels@earthlink.net thanks Cowboy. Stay safe, If you get on a Chinnook, ask for W02 Oggie. Let him know I know you. He will get you Home! ;) :)
Victor......

[Jeremy_K]

how many miles are on the cats?

[jayj@fastfab]

Somehow or other you need to contact cowboyup. I was just trying to contact him about wheels and probalby screwed up the posting. sorry for the inconvience.

[yankytuna]

have put a 92 sc engine into a 95 mustang. need a damper for the engine so that the obd2 will opick up the crank. anybody have one?

[roadfever2]

I hope I'm not too late here but I am VERY interested in the seats. Mainly the front ones. I only nead the actual seats, not the track/motor assemblies. Would you be interested in shipping them to 54411? The tops can easily be disassembled from the bottoms to make shipping easier (possibly a couple of packages). $200 -plus shipping???? More for the rears too? I would also be interested in the drivers side kick panel and passenger side front cornering light/trun signal.

Jon
Roadfever2aol.com

[95pearlbird]

Hey Cowboy,
Beautiful Car. Such a shame you had to part it all out!
Are you still around?

I'm interested in the following parts-
Stainless Magnaflow Cats- Are they 2 1/4 or 2 1/2"?
Raised Top @ $200- Is it a Magnum Powers piece?

Also interested in the following:
Other Exhaust Components- Downtubes w/ Cats attached?
Resonator? Looking for Magnaflow dual 2 1/2 In, 3" Out
Mufflers? What type and how much?
And the associated plumbing for all the above, with hangers-
Please cut in shippable, repairable sections w/ Sawzall.

SC Stock Floormats?
Did you have a Cold Air Intake System w/ K&N Cone Filter, or is it gone?
Spoiler, still have it? How Much?
Also need Rt. Front Door Speaker- Sold?


Please, don't get in a Chinook unless you have to! They are leaking boxcars.
If you have to, make sure they have min. 10 Gal. Hydraulic Fluid for "back-up."
Take the Black Hawk Express instead!
Always remember:> Helicopters do not fly, they beat the air into submission!
>If Harley-Davidson built Helicopters, would you fly in one?
-An Ex-Army Helio Mech.

Thanks for your Reply on the Parts! >>>God Bless Our Troops!<<< :)

-95 SC Auto- My "Pearlbird"

[Ira R.]

How about the engine dress up panel??

Ira

[victor malvar]

Hello I spoke with Wyatt Or Cowboy, about a week or less before this reply. I'm still trying to get that 1995 front end brought here to me. If you could call me 353-73-5013, I would surely apprciate it. Thank you so much. :)
my name is Victor.
Or please email me....
spinningwheels-sc@earthlink.net
Or if you like I would call you. I would need you tel. no.

[fatcat64]

how many miles on the gauge cluster, is it the 145 speedo, and do you still have it?

[bbird94]

Hey Bud,

I just had a accident with a animal of the forest! The World Ford Challenge in St. Louis is next weekend and I need parts immediately so I can make it. I was wondering if you had these parts for a '94 & if you have a 5-spd it would be even better: - AC Condenser
- HVAC fan (the fan for the AC Condenser)
- Brush Guard (the one that comes off the back of
front bumper) W/ the rivets to come with it
- Rivets to hold the Side Skirts
- Clutch Pedal Actuator
- Driver Side Hub Spindle

If you have any of these parts available it would be great if you can get them back to me by Tuesday or Wednesday! Just let me know and I will get the money to you ASAP!!! Thank you for your time and any help would be much appreciated!!!!

Thanx,
Brandon

[dougf]

:mad: Gang........the cowboy has left the building. Or so it seems, he has never answered any of my PM or my e-mails. Had to give up & buy the parts I needed from local shops & yard so that I could put my T-bird back together.

[TwoToneThunder]

he hasnt been on since january

[peteman]

I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.
Do you have a DIS? Mike Bolda (804)405-3067

[donnie189]

do you have any partds left?



I have a 95SC auto that I am going to part out. It has alot of aftermarket mods on it. Magnum ported parts on the sc, 90mm maf, 85mm tb, kooks headers, eibach springs, koni yellow shocks, bbk fuel press regulator, 255lph fuel pump, new stock heads, MSD DIS-4 and many other parts.
The interior is gray and black, exterior is blue. If you have any questions, you can contact me @ cowboyup-n-carolinagirl@earthlink.net.
I live in beaufort sc, and the car has 105k on it.