big block mounts

[pro street rich]

Well it seems that I get this asked of me more and more. How much of a market is there for these??? If you guys really want me to start building them, then lets hear it.... Lets get this ball rolling if there is really that big of a need. Remember you will have to be let me know all the info you have........Rich

[68COUGAR]

Thread fwd'ed to Scott Long, for his BB project car!

68COUGAR

[90SC BIG BLOCK]

I think a set of equal leigth shorty headers would be a help too. If you need help let me know .My swap isn't pretty right know ,but I'm using all SC accs. on the swap witch should cut cost alot and they mount in the same place witch is nice.And the the throttle cables pre-done would help out alot of people .

[Scott Long]

I would be interested in a set of mounts since I have no clue how I'm going to make this thing sit in the engine bay.

Would these bolt on to the frame or weld on? Also would I have to use the stock upper mount from the truck that was bolted to this engine block? And what to use for the insert? The 77 F250 insert?

[pro street rich]

If I go into this they would be "Bolt in" with "NO" cutting on the car. The rubber mount will also be part of the deal. All you will need is a 460, S.C. body and the time to put it together..........Rich..... P.S. one more thing,$$$$$$$$$$$$$$$$$$ lots of this as I want to build some more toys.........LOL

[90SC BIG BLOCK]

[QUOTE=pro street rich]If I go into this they would be "Bolt in" with "NO" cutting on the car. The rubber mount will also be part of the deal. All you will need is a 460, S.C. body and the time to put it together.

Are you shure you don't want to look at my set up first berore you begine making mounts.It would really save alot of money if you use the SC accs. to do the swap. I'v also been tring to lower the engine down more,and yes the stock hood does close down on the engine.

[DriftingThunder]

I would be interested in a set of mounts since I have no clue how I'm going to make this thing sit in the engine bay.

Would these bolt on to the frame or weld on? Also would I have to use the stock upper mount from the truck that was bolted to this engine block? And what to use for the insert? The 77 F250 insert?
Hehehe, Scott if you want help putting a 460 in your car I'd love to help out!