What can you tell me about these rotors???

I know about those rotors

I bet Not to many others on this site know what they are


I cant guarentee That these are the same rotors but
From the looks of what I see In the Pics Those Rotors were Experimental coating that Eaton was testing when developing the 2nd Generation M90 (94/95 Style) I Used to Own an Eaton Prototype (X-Port Blower) That was used for R&D My blower that I had was very similar to the 95 style blower

When I contacted Eaton about The History/Specs Of my Blower I was informed that The coating Was an Experimental Ceramic based Coating on the rotors and That It was tested on both Older Versions/Newer versions of the M90 The representative Told me that the coating really Improved efficiency of the Blower
(I dont now know why they didnt use it in production)

All I can really say about those rotors is

I sold My X-Port to a fellow SC member a while back With a MagnaPowers Inlet plenum I also Port matched the Inlet to the Blower and Ported the outlet on the blower His results were pretty Impressive
If I rememeber correctly He turned a 14.2@98mph in a basically Stock 93 Auto SC With A bigger Maf and some trans work
He used a stock TB and stock 30lb Inj
 
Back
Top