hard pedal but NO LIGHTS ON!!!

iwannanSC

Registered User
How can my pedal be hard, the pump not run, an dNO lights be on!???? All trouble shooting starts with the lights on...but what am I suppose to do???

The bulbs are not bad, they are on when key is in ACC. Ideas anyone??

Aaron
 
I had the same problem when my ABS unit went bad... theres some posts around here with others who have had the same problem.
 
ThePikey said:
I had the same problem when my ABS unit went bad... theres some posts around here with others who have had the same problem.


I third that. Rock hard brakes, no ABS lights at all. New pressure switch fixed it for me though.
 
Pressure switch

Where did you get a pressure switch, and where on the vehicle is it located?

I would love to get this problem fixed!!!

Thanks,
Aaron
 
Bigme574 said:
Where did you get a pressure switch, and where on the vehicle is it located?

I would love to get this problem fixed!!!

Thanks,
Aaron

I borrowed/stole the pressure switch from another ABS unit that I had. It's located underneath the ABS unit, and don't even attempt to replace it with the M/C in the car. If you know what you're doing, the car will be drivable in under two hours. You might want to buy the special tool, or you can just use a pair of channel locks to remove the switch.
 
Back
Top