Since i got my 94sc the lights on the EATC didnt work (the display does, but not the knob illumination) but i really didnt worry about it. Today i installed a factory single CD unit instead of the aftermarket unit and the buttons dont light up either. In addition, the clock works fine when the lights are off (nice and bright) but when the lights are on its very dim....this is ok when its complete night time, but not when its dusk and there's still light...you just cant see the clock during those times. I have replaced the clock with 3 others and it does the same. I have also replaced the EATC unit with a different one and it works the same way...full operation of the module and the display, but no illumination.
The odd thing is that the aftermarket radio I had was fully illuminated (all buttons) and the display too, but the display went on and off sometimes. But now that i replaced the factory radio...none of the lights are on except for the display...so the problem MUST be fixed now. Im stumped, the clock, radio, and EATC illumination all are under the same fuse, and that fuse is good, and the rest of the items on that fuse work properly (rear def. switch, cluster lights...cant really test the rest: phone switch & automatic shifter lamp because i dont have those).
Any thoughts? anybody have similar problems? What can i check? Thanx fellows
The odd thing is that the aftermarket radio I had was fully illuminated (all buttons) and the display too, but the display went on and off sometimes. But now that i replaced the factory radio...none of the lights are on except for the display...so the problem MUST be fixed now. Im stumped, the clock, radio, and EATC illumination all are under the same fuse, and that fuse is good, and the rest of the items on that fuse work properly (rear def. switch, cluster lights...cant really test the rest: phone switch & automatic shifter lamp because i dont have those).
Any thoughts? anybody have similar problems? What can i check? Thanx fellows