Torque settings for intake component bolts

pablon2

Registered User
I remember seeing a thread that had tons of FAQs in it, but I can't find it. One of the posts in it contained all the torque settings for the TB to Intake plenum, Intake plenum to SC, and intake elbow to intake manifold. Can someone send me a link to the thread if they know where it is hiding OR please just reply with the values if you know them. P.S. I spent about 30 mins looking for the info with no luck and had to give it up b/c I have dialup and it takes FOREVER to load the freegin' pages when searching!!! :mad:
 
18-22 ft-lbs is for tb, and inlet to sc, imagine would be around the same for the rest of the intake components
 
Thanks for the response. On a side note. I found the thread. It is by 'blkthnder' and is located in the general forum of 'FAQ Forum' and not in the member forum of 'FAQs' as one would have suspected.

rzimmerl said:
18-22 ft-lbs is for tb, and inlet to sc, imagine would be around the same for the rest of the intake components
 
Back
Top