LostDreamer
Registered User
so i went to pepboys today and got a tornado for my air intake just to see what it does. does anyone else use these or have you ever used these?
LostDreamer said:ok well im not sure do i keep it or no
DamonSlowpokeBaumann said:The AR have been known to spray oil out the front snout seal on 03-04 Cobras running high boost. I had one on my stang at 13psi and never had a problem however...
Mu AR has a goldcoatinmg on the rotors. As a matter of fact all my AR had that coating..Have they changed it or is it just the picture?
XR7 Dave said:On these cars, since 15psi is easily attainable with an Eaton, it only makes sense to up the ante a little. This kit is designed to run at a minimum of 18psi and as high as 21psi. Then factor in the typically innefficient IC system tubing on these cars and outlet pressures can easily run 5psi higher than that.
As for the coating, many small things have changed over time on these blowers and more changes are coming. For the better, I might add.