joenintiesc
Registered User
So I added the 8" Permacool fan to my intercooler using a preset 170* thermostat switch with power coming from the ignition wire (just outside the fuse box). It works as it should but now I notice the following:
After the engine has been running for awhile and I shut it down, there is a slight delay before the engine stops after the key is in the off position. You can hear that air sucking noise and that valve behind the sc closing.
It doesn't seem to be a problem, but it has never done this before and I'm having trouble seeing how it is related to the IC fan install.
Any ideas on this?
Thanks!
After the engine has been running for awhile and I shut it down, there is a slight delay before the engine stops after the key is in the off position. You can hear that air sucking noise and that valve behind the sc closing.
It doesn't seem to be a problem, but it has never done this before and I'm having trouble seeing how it is related to the IC fan install.
Any ideas on this?
Thanks!