removing supercharger / tubes

ben04

Registered User
what should i beware of while im doing this? it seems FAIRLY easy, and everybody i've asked whos done it says its easy, however im scared that i might remove something the wrong way and mess it up? anwyay, gonna attempt a bit now, but what should i look out for?
 
3 bolts hold the sc down to the top of the motor. The only tricky part is if you have an EGR valve. You'll need a hinged 1/4" rachet with a long but not deepwell 10mm socket to R&R it. When putting the sc back on bolt the EGR up 1st. Remove the plastic cover under the windshield wipers and over the bottom of the windshield to facilitate access to it.
 
hahaha i KNEW it wasn't that easy. k cool, thanks for the tips, im gonna plan it out and maybe do it this weekend :D
 
if you are removing the SC itself, you will need to remove the TB and intake tube also to jiggle it out.
 
Back
Top