PDA

View Full Version : M90 Vacuum Ports, what do they connect to (pics inside)



DMX
07-02-2002, 11:56 AM
http://ruffryde.rapperdmx.com/supercoupe-vacuum-ports1.jpg
Image 1 : This is the side that i assume sees CONSTANT vacuum.

http://ruffryde.rapperdmx.com/supercoupe-vacuum-ports2.jpg
Image 2 : This side sees both Vaccuum at part throttle and positive boost pressure during full throttle acceleration right?

I am not sure where all these ports are connected.

Fuel Pressure Regulator? Egr Valve, Boost Gauge, etc etc etc

Can anyone offer any insight?

90xr7reborn
07-02-2002, 02:50 PM
i just went and looked at mine and i will start with the one closest to the throttle body. that connescts to your main vacuum tree oon the firewall. the one with the black rubber connects to your pcv valve. thats about all i can help you with beccouse i have a t connector on the one on top of the tube that goes into the motor. just thought i would help with what i could. Bill

mannysc
07-02-2002, 04:10 PM
here is what I know the small one is acessories vacume the down curved with hose is pcv the upper one is cross talk tube mine dont have egr so I dont know the others early sc had egr I think