PDA

View Full Version : Engine dress-up panels. Hood latch panels.



Darkside
02-19-2005, 03:28 AM
Just checking to see if any of you guys would be interested in these hood latch area polished aluminum panels. I make them out of .025 polished aluminum. I am looking at making a run of 5 panels. If 5 of you are interested the price will be 35.00 plus 7.00 shipping. These panels are polished on the face and the bottoms have a "brushed" look. Let me know if any of you guys would be interested.
The second picture is a little fuzzy, sorry, my car is currently under reconstruction so the pics aren't the best.

Valentino
02-19-2005, 01:22 PM
when you get ready to do this. :D

Val

rzibilske77
02-19-2005, 01:58 PM
Lets go for like 10 or more, so we can knock it down like 5 bucks :)

I'm in if we can do it!








Just checking to see if any of you guys would be interested in these hood latch area polished aluminum panels. I make them out of .025 polished aluminum. I am looking at making a run of 5 panels. If 5 of you are interested the price will be 35.00 plus 7.00 shipping. These panels are polished on the face and the bottoms have a "brushed" look. Let me know if any of you guys would be interested.
The second picture is a little fuzzy, sorry, my car is currently under reconstruction so the pics aren't the best.

z90sc
02-19-2005, 02:50 PM
..count me in,pm me and tell me where to send the m/o...
z

Tazer999
02-19-2005, 03:02 PM
Damn, if it wasn't right now I would be all over this. If its in a few weeks I will definately get one though

Ira R.
02-19-2005, 03:10 PM
Just checking to see if any of you guys would be interested in these hood latch area polished aluminum panels. I make them out of .025 polished aluminum. I am looking at making a run of 5 panels. If 5 of you are interested the price will be 35.00 plus 7.00 shipping. These panels are polished on the face and the bottoms have a "brushed" look. Let me know if any of you guys would be interested.
The second picture is a little fuzzy, sorry, my car is currently under reconstruction so the pics aren't the best.

Are these for the 89-93 or the 94-95 set up??

Ira

Darkside
02-19-2005, 04:36 PM
89-93, but I can make one to fit 94/95's. I guess I didn't know they were different. :confused: If anybody wants one for a 94/95 they would need to send me their stock cover so I would have a template.

Tazer999
02-19-2005, 04:40 PM
Chris: Would you be interested in making more of these at a later date or no?

Darkside
02-19-2005, 05:12 PM
Sure. Send me a PM, let me know when you might be ready and we'll go from there. :)

Mikessupercoupe
02-19-2005, 11:51 PM
Just checking to see if any of you guys would be interested in these hood latch area polished aluminum panels. I make them out of .025 polished aluminum. I am looking at making a run of 5 panels. If 5 of you are interested the price will be 35.00 plus 7.00 shipping. These panels are polished on the face and the bottoms have a "brushed" look. Let me know if any of you guys would be interested.
The second picture is a little fuzzy, sorry, my car is currently under reconstruction so the pics aren't the best.


I Would be interested in one for 94-95, when will this take place?

thanks,
Mike
Mikessupercoupe@adelphia.net :cool:

Darkside
02-20-2005, 12:55 AM
I Would be interested in one for 94-95, when will this take place?

thanks,
Mike
Mikessupercoupe@adelphia.net :cool:
As soon as I can get 5 people that will buy one. As soon as I can get 5 people that will buy one I will start making them.

Darkside
02-21-2005, 12:14 AM
It looks like we have 5 people that are interested. If you guys can pay by Saturday the 26th, I will ship them out on Monday the 28th. I will ship them priority mail so you should have them by Wednesday. If you live in Canada the shipping might be a little more pricey. If there is anybody on this list that isn't interested at this point, let me know. If this list is accurate, then payment can be paypal'd to zonaboy@comcast.net, or a money order can be mailed. Let me know if you plan to mail payment and I will PM you my address. Thanks guys.
1. Valentino
2. z90sc
3. Tazer999
4. Mikessupercoupe (94/95 version)
5. Pablon
6. rodney92sc

Tazer999
02-21-2005, 12:18 AM
Chris: I won't be able to do this for a little bit so you will have to cross me off for now

Darkside
02-21-2005, 12:26 AM
Chris: I won't be able to do this for a little bit so you will have to cross me off for now
Tazer, sent you a PM. This is still a go guys, if the rest of you are interested.

rzibilske77
02-21-2005, 02:12 AM
I'm in Chris i need a couple weeks though...is that ok









It looks like we have 5 people that are interested. If you guys can pay by Saturday the 26th, I will ship them out on Monday the 28th. I will ship them priority mail so you should have them by Wednesday. If you live in Canada the shipping might be a little more pricey. If there is anybody on this list that isn't interested at this point, let me know. If this list is accurate, then payment can be paypal'd to zonaboy@comcast.net, or a money order can be mailed. Let me know if you plan to mail payment and I will PM you my address. Thanks guys.
1. Valentino
2. z90sc
3. Tazer999
4. Mikessupercoupe (94/95 version)
5. Pablon

Darkside
02-21-2005, 11:09 AM
OK, I have money from the following.

1. Rodney92sc--Paid
2. Tazer999--made payment arrangements
3. Valentino--Paid

Valentino
02-21-2005, 01:15 PM
Hey Chris,

Just sent you the funds with shipping instructions.

Thanks,

Val

Nettlesd
02-21-2005, 02:10 PM
Are you offering them for the 94-95 models?

Darkside
02-21-2005, 02:29 PM
Are you offering them for the 94-95 models?
Yes. I am. I just need to go to the junkyard and get the factory panel so I can make a template.

Darkside
02-21-2005, 02:30 PM
Can anybody post or email me a picture of their stock 94/95 panel?

Darkside
02-21-2005, 06:12 PM
Updated list:

1. Rodney92sc--Paid
2. Tazer999--made payment arrangements
3. Valentino--Paid
4. Irar--Paid

minbe
02-22-2005, 12:28 AM
I'll take one for a 1990 if it's not too late. Let me know and I'll send payment.
Can you ship to a P. O. Box?

z90sc
02-22-2005, 09:57 PM
.....Chris,you have a pm.....
z

Darkside
02-23-2005, 01:52 AM
Updated list:

1. Rodney92sc--Paid
2. Tazer999--made payment arrangements
3. Valentino--Paid
4. Irar--Paid

New updates:

1. Rodney92sc--Paid
2. Tazer999--made payment arrangements
3. Valentino--Paid
4. Irar--Paid
5. minbe--Paid
6. z90sc--payment in mail

Darkside
02-25-2005, 08:39 PM
New updates:

1. Rodney92sc--Paid
2. Tazer999--made payment arrangements
3. Valentino--Paid
4. Irar--Paid
5. minbe--Paid
6. z90sc--Paid

Everyone has paid. Panels will ship on Monday. Thanks.

Ira R.
02-25-2005, 10:51 PM
New updates:

1. Rodney92sc--Paid
2. Tazer999--made payment arrangements
3. Valentino--Paid
4. Irar--Paid
5. minbe--Paid
6. z90sc--Paid

Everyone has paid. Panels will ship on Monday. Thanks.

Excellent! Can't wait to see it!!

Ira

XxSlowpokexX
02-26-2005, 10:36 AM
Count me in for a 94/95 version

mattyblazer
02-26-2005, 11:03 AM
I wouldnt mind one of them for my '90

Thanks
-Matt

Darkside
02-28-2005, 03:35 AM
Well guys, the 89-93 panels are done for those that paid:

1. Rodney92sc
2. Valentino
3. minbe
4. mattyblazer
5. z90sc
Here are some pics of the finished panels. They will ship Monday.
For the two guys that ordered 94/95 panels, I will hopefully ship on Tuesday.
I am having trouble finding a template for these years. The birds I have found in the junkyard have all been wrecked in the front. I am going to try a couple of places tomorrow(Monday). If I can find one then I will ship on Tuesday. If not, I might have to do refunds. If one of you guys would be willing to ship me your stock panel I will pay for shipping and ship it back to you with your panel. Let me know. You could probably just stuff it in one of those padded envelopes at the post office. Geesh, I never thought it would be a problem to find one of those stock panels for a template. :( I'll keep you posted.

minbe
03-06-2005, 12:07 AM
Got the panel, looks great.
Thanks

Darkside
03-06-2005, 01:12 AM
Have any of you guys installed them yet? Have any pics installed?

Sampo
03-18-2005, 05:31 AM
Just checking to see if any of you guys would be interested in these hood latch area polished aluminum panels. I make them out of .025 polished aluminum. I am looking at making a run of 5 panels. If 5 of you are interested the price will be 35.00 plus 7.00 shipping. These panels are polished on the face and the bottoms have a "brushed" look. Let me know if any of you guys would be interested.
The second picture is a little fuzzy, sorry, my car is currently under reconstruction so the pics aren't the best.

Hi!

Do you still make those dress-up panels? IŽd just like to have one!
Thanks! :cool:

Mikessupercoupe
03-18-2005, 11:37 AM
Have any of you guys installed them yet? Have any pics installed?
Hey Chris,

I haven't been here for a couple of weeks but if you are still making these for the 94-95 style then I'm interested. At last read you hadn't made them for that yet. Let me know and I'll send the money.

thanks,
Mike Irving
Mikessupercoupe@adelphia.net
or Irving407@aol.net :cool:

littleboylan
03-18-2005, 06:52 PM
I am interested in a '92 model one, Let me know when your gonna run off some more and Ill send ya a payment, Thanks Mike

ThunderTurkey
03-18-2005, 09:57 PM
Just checking to see if any of you guys would be interested in these hood latch area polished aluminum panels. I make them out of .025 polished aluminum. I am looking at making a run of 5 panels. If 5 of you are interested the price will be 35.00 plus 7.00 shipping. These panels are polished on the face and the bottoms have a "brushed" look. Let me know if any of you guys would be interested.
Hey Albuquerque ....... let me know too!! I have a '93 ! :)

supercatxr7
03-18-2005, 11:01 PM
Hey Albuquerque ....... let me know too!! I have a '93 ! :)


I'm interested in one for a 1990.

thanks,
mark

Darkside
03-20-2005, 11:12 AM
Hey Chris,

I haven't been here for a couple of weeks but if you are still making these for the 94-95 style then I'm interested. At last read you hadn't made them for that yet. Let me know and I'll send the money.

thanks,
Mike Irving
Mikessupercoupe@adelphia.net
or Irving407@aol.net :cool:
The 94/95 aren't available yet. I am working with a guy in CO at the moment to get a template made, then I will offer them. I'll let you know when they are available.

Sweet90SC
03-20-2005, 03:29 PM
Chris,
If you do another 5 or so for the 90 include me... They look great.... are you taking Money orders or what??? I'll go ahead and send you the money now if I could get on the list...Say you'll do another group!! .....

Please.. :D

Darkside
03-22-2005, 03:16 AM
To anyone that is interested, I have the 93 style panels as well. Here are a couple of pics. The 93's have the one side notched out because of the windshield wiper resevoir and the front is a little shorter. This panel is Pablon2's , who is probably ready to kill me because this was supposed to go out last Monday. :o Anyway, here are some pics.

Lonestar SC
03-22-2005, 07:29 AM
I'm interested in one for my 89 SC. Please include me on your next run.

Thanks...

pablon2
03-22-2005, 08:51 AM
Hey that looks awesome! I can't wait to put it on! I appreciate the extra work you had to go through to make this.

P.S. Does the apple come with it? :p


To anyone that is interested, I have the 93 style panels as well. Here are a couple of pics. The 93's have the one side notched out because of the windshield wiper resevoir and the front is a little shorter. This panel is Pablon2's , who is probably ready to kill me because this was supposed to go out last Monday. :o Anyway, here are some pics.

Sampo
03-23-2005, 03:31 PM
I have paid to you... I think you will get it next week because I live so far away... ;)

pablon2
03-28-2005, 08:22 AM
Got the '93 panel last week. Looks/fits great.
Thanks,
Paul


To anyone that is interested, I have the 93 style panels as well. Here are a couple of pics. The 93's have the one side notched out because of the windshield wiper resevoir and the front is a little shorter. This panel is Pablon2's , who is probably ready to kill me because this was supposed to go out last Monday. :o Anyway, here are some pics.

ThunderTurkey
03-28-2005, 11:41 PM
Have any of you guys installed them yet? Have any pics installed?
Ummmmm ..... as soon as it gets here, that is!! :D

Darkside
03-29-2005, 12:52 AM
Ummmmm ..... as soon as it gets here, that is!! :D
Panels are going out Tuesday and Wednesday! Either way you will all receive them by Friday! You Arizona guys are so impatient. :eek: :p :D

KaoticKreationz
04-04-2005, 07:49 PM
If your still making them, I'm interested in one for my 91. Let me know, thanks.

Sampo
04-10-2005, 04:45 AM
Someone who has installed this dress-up panel! Please, send pics of it!!! :)

I want to see how it's look....

My panel is still in FL so I have to wait a long time before I'll get it...

Sampo
04-14-2005, 05:03 PM
Someone who has installed this dress-up panel! Please, send pics of it!!! :)

I want to see how it's look....

My panel is still in FL so I have to wait a long time before I'll get it...

No one hasn't taken pics...! :(

pablon2
04-14-2005, 10:36 PM
No one hasn't taken pics...! :(

I'm having engine work done now so it makes no sense for me to put it on until that is done for fear of scratching it. I'll have a pic in 1-2 weeks.

Sampo
04-15-2005, 03:01 AM
I'm having engine work done now so it makes no sense for me to put it on until that is done for fear of scratching it. I'll have a pic in 1-2 weeks.


Ok, if you could send it here...That would be fine! ;) I have to wait my own for over five weeks!

Or if somebody else has that panel installed, please send a pic...

Sampo
04-20-2005, 07:25 AM
Pics......... :)

pablon2
04-29-2005, 01:09 AM
Well, I just got back from the ER where I had my hand stitched up b/c I sliced it when installing the panel. No lie. :eek: Anyhow, here are some pics. One is without the hood release lever installed and the other is with it. The third pic is just of my engine, b/c I like it! :p

Sampo
04-30-2005, 03:16 AM
Well, I just got back from the ER where I had my hand stitched up b/c I sliced it when installing the panel. No lie. :eek: Anyhow, here are some pics. One is without the hood release lever installed and the other is with it. The third pic is just of my engine, b/c I like it! :p


Thanks for the pics! ;)