Ported M112 Blower

[sho taurus]

Have a few ported M112 Eatons off 01-04 Lightnings for sale. Have 1 ported one done now for $600 (plus the ride from 23669) and will probably have another finished each week. Right now in hand I have 3 total but only 1 has been finshed ported. I have another on my truck that is ported and polished on the outside that will be for sale in a month or so. It feels great. They say you get about 2 pounds of boost from port job. I dyno'd in December 428rwhp/545rwtq with 15psi boost. I have an appointment for next Wednesday for dyno to see what hp/tq gains I got. Also to see how much boost I got too. I don't have a Autometer Boost gauge so I don't know until I get on dyno machine. Stock boost gauge on dash only goes to 10 psi. If interested email me at sho_taurus1111@msn.com or if you want something aluminum on your SC polished up or ported let me know too. I have 2 SC too so if you have a stock parted that you want done, I can probably do the piece of one of mine and as soon as I get yours I can ship right back to you. So your downtime won't be so bad. I just got laid off from Nasa due to lack of research funding so I'm trying to make my bills if you know how that is. Thanks, Kevin

PS here are some pics of the port job and polishing

[ThunderRoad]

ALSO POWDER COAT IS OFF..A SLIGHT AMOUNT OF ALUMIUNM PAINT :eek: ON BOLT HEADS :cool:

[sho taurus]

ALSO POWDER COAT IS OFF..A SLIGHT AMOUNT OF ALUMIUNM PAINT :eek: ON BOLT HEADS :cool:


Stripping the paint isn't problem. I bought for mine all new shiny hardened bolts to replace the stock ones. Even the ones that hold front snout on too. To polish the blowers I'm charging $450 (plus the ride to and from 23669) if you send the blower in one piece. Because I'll take it apart and repack the back bearings, New SC fluid and new snout gasket. If you take it apart and send me the parts I need to polish just $400 (plus the ride to and from) and then you would have to do all that I mentioned above. They are not hard to take apart and put back together. Also it might help you on the shipping too if it was broke down. Takes about 5 days to finish to a mirror shine. Thanks Kevin

[sho taurus]

http://www.planetsmilies.com/smilies/sign/3/sign34.gif

[sho taurus]

Polished M112 would cost extra. If someone wants their blower polished email me at sho_taurus1111@msn.com. Price is $450 includes polishing, 6 oz. Redline syn. oil, anaerobic seal and add more grease to rear bearings. Or if you have any other aluminum parts parts let me know. I'm doing a top IC tube right now off my 90 parts car SC. Thanks Kevin