View Full Version : proportioning valve issue...

03-04-2005, 08:25 PM
Ok... while replacing my accumulator and master cylinder last month, I also found out my proportioning valve was bad. I got another one off a donor car and found out why my old one was bad. the sensor was broke off. well i get the new on and get it put on, but i found out that the clip that holds the wires on is broke, but the wires are still there with the metal clips there.

what would be the best way to go about fixing this wiring issue and how important is it that those wires be hooked up. would it be better to find a donor car and clip the wires or try to use some colorful construction to fix them so they make contact