Fuel issues

BARTHWY59

Registered User
89 5 - speed ran fine one day .. next day won't start. Have spark.. no fuel pressure... jumped fuel relay in trunk and pump works fine and gets pressure at shrader valve. Swapped relay .. inertia switch and eec from running 89 5 speed........ still no go !!!!! No codes. BTW put a new BHJ dampner on last week with new crank sensor. Running out of ideas , any help would be appreciated.. Thanks in advance
 
Does the fuel pump work when you do not jump the relay in the trunk? Have you replaced the IRCM? If the EEC Power relay inside the IRCM does not close, then the injectors will not work.
 
Back
Top