Ok I can't seem to get the SC running. I've checked out all the vacuum lines and they are good, I have the Wynn Gaskets in so I don't think its a leak. Now, Ive run a compression test and both banks came out 150 or above. Nothing out of the ordinary. The plugs are AP4544 double platinum and the wires are good. I replaced the IAC and the TPS with sensors that came off a working SC. The coolant sensor was replaced as well. I keyed up the engine twice to do the MAF test and still nothing. The car dies at idle and will only run when the throttle is used to keep it running. I ran codes before switching out those sensors, I forgot the exact ones at school but they were regarding the specific sensors mentioned. Could it be the EEC? Any help would be great.
Phil
Phil