Well I figured it was the head gasket so I replaced it, but i still have low compression to the tune of 90psi compared to the 145 in all the others!! That's w/ a brand new gasket and arp studs. I though it might be cylindar rings, but i have gotten no smoke out the exhaust which should happen since oil would be suckind into the cylindar on the down stroke. I added oil to the cylindar and the compression rose to 120psi which rules out a bad valve seal. I'm thinking cracked or warped head. Also, prior to this I have been getting a good deal of coolant in my oil. I have not run it enough since the new hg to see if it's still leaking. I'm not sure where it's comming from but it's not the oil cooler. What do you all think? I'm getting ready to buy new heads but I want to make sure that's what's wrong.
Thanks,
Kyle
Thanks,
Kyle