Removing Clutch Pedal?

I have lossened the 3 bolts that go through the firewall. it still won't budge. is there another bolt i don't know about? if so how do i get to it? Also, I got the clutch master cylinder 1/4 turned and loose. Does it come out to the engine bay side or do i pull it through with the clutch pedal to the interior?

Rich Thompson posted a thread on converting his pedals over. You might check the thread or his website and see if the info could help you.

http://www.sccoa.com/forums/showthread.php?t=46973&highlight=clutch+pedal

You have one more bolt up under the dash you need to pull. Its hard to get to but it can be done. Also The clutch master cylinder goes out through the engine compartment.

This thread is sort of applicable. Do a search and you will find even more.

http://www.sccoa.com/forums/showthread.php?t=59352&highlight=clutch+pedal