Removing M90 rotor pack

supercatxr7

Registered User
Okay, got the nose off the blower but am having trouble removing the rotor pack. Are there any tricks or tips to pulling the rotor pack and plate out?
 
Removing rotor pack

Take a piece of wood and insert it into the outlet part of the supercharger
Against the plate for the rotorpack Then tap the wood with a hammer


Make sure you use wood or you will damage the plate
 
thanks.....

Popped right out after a few taps, thanks. Last question, when assembling back together, should sealer be used between the rotor plate and supercharger case? Just standard rtv?
 
supercatxr7 said:
Popped right out after a few taps, thanks. Last question, when assembling back together, should sealer be used between the rotor plate and supercharger case? Just standard rtv?

Yes, Loctite 518, no RTV
 
Back
Top