PDA

View Full Version : New Wheel Style Possabilities!!!!



cudaz101
04-25-2005, 08:51 AM
OK...So I have finally made it to this point. Below are the Three new wheel options/possabilities. Please participate and PM your friends to participate. Maximum input is needed to decide on which style to go with. Simply...I can't afford to supply all three in the quantity needed to manufacture them. Se we have to start with ONE...Then more will come later.

FR500
http://members.tccoa.com/theshop/FR500_Silver.jpg
http://members.tccoa.com/theshop/wr-fr500.jpg

Saleen Speed Star
http://members.tccoa.com/cudaz101/Saleen300series.gif

Deep Dish Bullet
http://members.tccoa.com/theshop/Black_Deep_Bullet.jpg
http://members.tccoa.com/theshop/black_DeepDish_Bulet.jpg

TBIRD1
04-25-2005, 01:28 PM
I would like a set of the seleen wheels let me know sizes, finish, and when they are going to be avalible if you are going to make this style
thanks Nick

96sport
04-25-2005, 05:14 PM
Even though I like the FR500s and Speedstars I would like to see a big wheel put under the birds. I think a nice sized 10 or 10.5 would look great...even though it would require an exact offset/backspacing and would be a tight fit. So I voted for the Deep dish bullitts.

Russell

Jimmy 2Coupes
04-26-2005, 09:58 PM
The deep dish bullitts would be my choice and chrome would be my preference. If made I'll buy. :)

LIL QIK
04-27-2005, 01:06 PM
I really like the deep dish........and I actually like them in black...........but then again my car is black.......

I was actually thinking of converting my lug to the mustang just so I could run them. My cousin has them on his car 17x9.5 and 17x10.5 and they really look good.

I would definitely go with a set........especially in black.

96sport
04-27-2005, 03:40 PM
I really like the deep dish........and I actually like them in black...........but then again my car is black.......

I was actually thinking of converting my lug to the mustang just so I could run them. My cousin has them on his car 17x9.5 and 17x10.5 and they really look good.

I would definitely go with a set........especially in black.

If you ran the mustang offset 10.5s they would stick out like a tractor tire. ;)

LIL QIK
04-27-2005, 04:24 PM
If you ran the mustang offset 10.5s they would stick out like a tractor tire. ;)
Yea.......lol..........that would kind of suck...........guess I'm not that much of a redneck.......lol

I'm new to the SC scene.......but I think that I would like to run like an 18x8 and a 18x10. With those sizes I could run factory diameter tires and not have to lower the car. Sounds weird........but I really don't think that I want to lower this one.

BlownSix
04-27-2005, 11:54 PM
Did you get my email cudaz? ;) I had actually asked if you could get the Deep Dish Bullets...I'd like them in either anthracite or a satin silver finish.

Would you guys like them to be dished on all four courners? Or just the rear wheels and have the fronts more flush mounted? Is this even possible cudaz?

Someone needs to do a photochop of the deep dish bullets, please.

96sport
04-28-2005, 12:12 AM
Personally I like the deep dish rear....that is what the deep dish look is all about. :D

over_charged SC
04-28-2005, 12:12 AM
Sorry Brad, but unlike the others the FR500 just looks sweet. You probably know which color scheme I would pick too. The bullet just doesn't seem you.

LIL QIK
04-28-2005, 07:34 AM
If I could get the FR500's in an 18x10 and 18x8.........I could see going with those instead of the Deep Dish. It would still have a luxury/sport look, which is what I really want.

B_on_B_89xr7
04-29-2005, 09:59 PM
FR500 has my vote

XxSlowpokexX
04-30-2005, 10:26 AM
FR500 all the way..Would we be able to get these with proper offset but with a stang bolt pattern?

cudaz101
04-30-2005, 01:19 PM
FR500 all the way..Would we be able to get these with proper offset but with a stang bolt pattern?


Damon,
You could get them right now. All you would have to do is machine the offset to +34MM or so...I think right now they are only available in a +24 or +27??? Regardless, no I won't be doing any custom machine work with these as I don't have the luxury that I once had in being able to do that.

Everyone else...Thanks for the input. I am looking for ALOT more participation than this though.


Brad

BlownSix
04-30-2005, 03:04 PM
C'mon guys! I really want the Deep Dish Bullets in our bolt pattern...Spread the word and let's make this happen!

blue94sc
04-30-2005, 03:17 PM
They all look great but I have to admit that I prefer the Deep Dish Bullets.
Then again Im a little (scratchy scratch...old skool!).
:D

cudaz101
05-02-2005, 08:49 AM
Hate to say it...But this is not even close to being enough interest. The poll goes until May 25th though...Will see if things pick up a bit.


Brad

BlownSix
05-02-2005, 01:09 PM
How many do we need for the wheel of choice (Deep Dish!!) to get made?

Is this over on TCCoA? If it's not, maybe it should be for more traffic.

gtpcoop
05-03-2005, 12:48 AM
FR500 is the best looking rim in my opinion.

90SC BIG BLOCK
05-14-2005, 10:50 PM
OK...So I have finally made it to this point. Below are the Three new wheel options/possabilities. Please participate and PM your friends to participate. Maximum input is needed to decide on which style to go with. Simply...I can't afford to supply all three in the quantity needed to manufacture them. Se we have to start with ONE...Then more will come later.

FR500
http://members.tccoa.com/theshop/FR500_Silver.jpg
http://members.tccoa.com/theshop/wr-fr500.jpg

Saleen Speed Star
http://members.tccoa.com/cudaz101/Saleen300series.gif

Deep Dish Bullet
http://members.tccoa.com/theshop/Black_Deep_Bullet.jpg
http://members.tccoa.com/theshop/black_DeepDish_Bulet.jpg


OH,man ,you got to get the Speedstar's in 20" inch Rims. Put some 245-35-20 up front and 265-35-20 in back .Lower 1.5" in back ,2.25"in front.

TbirdSC93
05-25-2005, 04:36 PM
it may be to late but i like the deep dish bullets....those things are freakin sweet

Frank Bokodi
05-26-2005, 06:09 PM
Brad, we've talked. you know I like and want the ADR Kasai's, but if I can't get them again for under $255 like everywhere else I've searched. The FR 500 is the next best thing. If you had those I'd buy them right now. (for around $160 a piece I hope)

talonhead
05-28-2005, 03:25 PM
Late as usual. Still like the deep dish. mikeH