need tip 4 rear brake rotor removal

Randy N Connie

Registered User
Any one have some tip on how to remove the rear brake rotors.
Calipers have been removed.

I tried a puller.
I tried a puller & hammer.
I tried a puller with heat & hammer.
I remove the axle nut & tried a puller & hammer.
I remove axle nut and tried a puller with heat & hammer.

Do I need a bigger hammer than a three pound hammer?
Or is this another part that needs to be cut off with a torch?

Thanks Randy
 
Last edited:
Randy N Connie said:
Any one have some tip on how to remove the rear brake rotors.
Calipers have been removed.

I tried a puller.
I tried a puller & hammer.
I tried a puller with heat & hammer.
I remove the axle nut & tried a puller & hammer.
I remove axle nut and tried a puller with heat & hammer.

Do I need a bigger hammer than a three pound hammer?
Or is this another part that needs to be cut off with a torch?

Thanks Randy
I had the same problem with my buddy's F-150 front rotor. I thought the damn thing was pressed on the hub! I tried all of the above methods before i asked him if was OK if i destroyed the rotor. I then pounded the crap out of it with a large ball peen hammer and eventually it came loose. It sucks that yours is on the back because you can't turn the wheel to give yourself some backswing room. :(
 
Back
Top