PDA

View Full Version : need to know wher to get a cam tool?



resmn12
05-05-2005, 11:51 PM
i would like any info on where i can get a cam position sensor tool to set the timing.

MikeKanterakis
05-06-2005, 12:36 AM
do a search, someone posted a pic that Dave put up that shows how to do it with out the tool. BAsically, just set the crank to zero, and then put the sensor back the way you found it. Set up the metal fin (in the shape of a C) so that it point towards the front of the car, and bias it just a bit so that it points towards the end of the radiator that's on the driver's side.

The pic makes this a lot easier to understand. Don't worry about being perfect with this. The book says that there's a 30 degree area in which you can set the thing so you've got some room for error.

David Neibert
05-06-2005, 08:46 AM
i would like any info on where i can get a cam position sensor tool to set the timing.

http://www.sjdiscounttools.com/otc6467.html


http://store1.yimg.com/I/sjdiscounttools_1841_12915675


David