PDA

View Full Version : SC/MN12/FN10 Parts - Very Large Inventory



racecougar
05-19-2005, 12:19 AM
I'm starting a new for sale thread, since the current one is getting pretty huge.

If you don't already know, I part out MN12's (and build them when I have time ). I currently carry parts from 89-97 3.8L N/A's, 91-93 5.0L's, 94-97 4.6L's, 89-93 SC's (auto's only), and 93-94 Mark 8's. I try to keep between 8 – 10 parts cars in stock at all times, so I usually have what you’re looking for. Most of my prices are not set in stone either, feel free to make offers (especially on big items such as motors, seats, etc.). I also consider trades, so let me know what you have. Check the for sale forum, I often run sales on parts that I have an abundance of.

I don't currently stock any 94-95 SC or 5-speed specific parts (145 MPH speedos, 5-speed consoles, etc).

I also sell parts on ebay frequently under the name of "racecougar".

Email me at [email protected] to request parts or to get more information and pics of parts.

I'm located just south of St. Louis, MO, and welcome people to stop by and see my projects or pick up parts. Just contact me first so that I know you're coming.

Thanks,
Rod

racecougar
05-24-2005, 01:04 AM
bump.

-Rod

Jason Wild
05-24-2005, 09:42 PM
Rod
do you have the mirror for the pasanger side on a Mark 8

racecougar
05-24-2005, 11:13 PM
Sorry Jason, I don't have any Mark 8 mirrors right now.

-Rod

90SCKid
05-26-2005, 08:23 PM
Do you have any parts car with moonroofs? If so I need the plastic part that clips around the switch and secures it with two screws, also the trim on the outside that says "Roof" with and up and down arrow would be nice. I replaced the headliner in my 90 and when I took the two screw out of the plastic piece, it crumbled. I also tried taking it out of one of our parts cars, and that one crumbled too. So I think they are fragile. How much for the two plastic pieces and screws shipped to 12078? Thank you, Bradley.

racecougar
05-26-2005, 11:21 PM
Sorry Bradley, I don't have either of those parts in good condition right now. Both of those parts are either broken or sold on all of the sunroof equipped parts cars that I have.

-Rod

DriftingThunder
05-27-2005, 02:36 AM
Do you have any functioning hand-brake cables?

racecougar
05-30-2005, 03:53 PM
Andy, sorry for the delayed response. I do have a good handbrake cable in stock. Please email me with your zip code for a shipped price.

-Rod

talonhead
05-30-2005, 05:39 PM
Rod I think the fuel door sol. will work. Now to mount and wire it and the manual release to inside. Thanks.

Need ARC actuators, was out getting a take care of list going and the front ones are mangled. Still at same place. email or IM.
Hope you hade a good weekend. mikeH

racecougar
05-30-2005, 06:14 PM
Mike,

It's been a busy weekend. I've been here selling parts and working on a few of my cars. Glad to hear that the fuel door release solenoid will work for you. I just sent you an email about the ARC actuators.

-Rod

Ira R.
05-30-2005, 06:37 PM
Would you happen to have the fuse box for under the dash for a 95?

Ira

racecougar
05-30-2005, 06:49 PM
Ira,

I do have one in stock. Please email me at [email protected] with your zip code, and I'll give you a shipped price.

Thanks,
Rod

BadstuW
05-30-2005, 07:43 PM
Hello,
Was wondering if you had a pair of black door panels that will fit a 93 sc with good door handles. thanks!

racecougar
05-30-2005, 11:41 PM
Sorry BadstuW, I don't have any good black 89-93 door panels right now.

-Rod

racecougar
06-01-2005, 12:19 AM
Bump.

-Rod

racecougar
06-05-2005, 05:02 PM
ttt.

-Rod

supercoupe95
06-11-2005, 07:09 PM
i need to know if u have a trans that will fit my 95 4.6 tbird, and how much for it.

thanks reuben

abronson.sc89
06-11-2005, 07:16 PM
hey rod,
do you happen to have a throttle body around 80mm that will fit an 89 sc. and do you have an undersized pulley for the sc or know where to get one cheap?

-aaron-

racecougar
06-12-2005, 12:11 PM
Reuben, I don't have any 4.6L style 4R70W's in stock at the moment.

Aaron, I mainly sell OEM parts. I don't have any aftermarket SC parts for sale.

-Rod

racecougar
06-15-2005, 02:32 AM
bump.

-Rod

drummerzrok24
06-15-2005, 01:48 PM
Any mark8 front air struts?

racecougar
06-16-2005, 08:04 AM
Sorry, no Mark 8 front air struts in stock right now.

Reuben, if you're still looking for a 4.6L 4R70W, send me an email at [email protected] with your zip code for a shipped price on one. I just picked up a 97 4.6L MN12 with a good transmission.

-Rod

Kurt K
06-16-2005, 03:28 PM
Sorry, no Mark 8 front air struts in stock right now.

Reuben, if you're still looking for a 4.6L 4R70W, send me an email at [email protected] with your zip code for a shipped price on one. I just picked up a 97 4.6L MN12 with a good transmission.

-Rod

Rod,

I'm looking for a 93 LX driver's side door panel. I'd prefer black, but it could be dyed. Shoot me an email.

Thanks

racecougar
06-17-2005, 01:34 PM
Kurt, you have mail.

-Rod

abronson.sc89
06-17-2005, 09:23 PM
hey dude i need an idle air control valve for my 89 sc. how much u want for it

-aaron-

racecougar
06-18-2005, 03:06 PM
Aaron,

I do have one in stock. Please send me an email at [email protected] with your zip code for a shipped price.

-Rod

tbirdfan1993
06-19-2005, 01:00 AM
Do you have a tranny for 5.0? I hope so, I'd be willing to come n get it.

nighttrain
06-19-2005, 01:53 AM
Looking for pass side corner taillight...my car got whacked by a bus. :eek: :mad:Zip code is 06492.Thanks!

racecougar
06-19-2005, 07:28 PM
tbirdfan1993, I have a couple AOD's, but I just sold the only one I had from a 5.0 MN12. If you're interested in a SC or N/A AOD, send me an email at [email protected] for a price.

nighttrain, please email me at [email protected] and let me know what year/make car this is for.

-Rod

intercooled89xr
06-20-2005, 01:14 AM
im looking for a gray driverside A-pilar for an 89 cougar xr7 and need the window cowl the pice under the wipers if u have them how much. thanks for the help

racecougar
06-20-2005, 12:14 PM
intercooled89xr, I do have the gray 89-93 driverside A-pillar in stock, but I don't have the wiper cowl that you're looking for. For a shipped price on the A-pillar, please email me at [email protected] with your zip code.

-Rod

BT Motorsports
06-25-2005, 02:44 AM
Rod, I'm looking for a driver's side valve cover for a 3.8 n/a late style gasket (94+) suitable for powder coating.

Paul

racecougar
06-25-2005, 09:42 AM
Paul, the only ones I have in stock right now are the 89-93 style.

-Rod

racecougar
07-01-2005, 05:17 PM
Picked up a couple more MN12's for parts, a 97 Cougar 4.6L and a 94 Tbird 4.6L:

http://members.tccoa.com/racecougar/97%20cougar.jpg

http://members.tccoa.com/racecougar/94%20Tbird%201.jpg

The Cougar has gray cloth interior, and the Tbird has tan leather interior.

Please email me at [email protected] with your parts requests.

Thanks,
Rod

BT Motorsports
07-01-2005, 05:26 PM
Rod, need a favor of you. Can you confirm or deny that the radiator for the 97 4.6 cougar will fit in a 97 3.8?

Paul

racecougar
07-01-2005, 05:35 PM
Paul, AFAIK all 3.8L radiators have a radiator cap, while all 4.6L radiators do not (they use a pressurized overflow bottle). As far as mounting is concerned, they bolt up the same.

Hope that helps.

-Rod

BT Motorsports
07-01-2005, 05:55 PM
Paul, AFAIK all 3.8L radiators have a radiator cap, while all 4.6L radiators do not (they use a pressurized overflow bottle). As far as mounting is concerned, they bolt up the same.

Hope that helps.

-Rod
Wow, didn't know that. If you get some free time, could you snap a pic of the 4.6 radiator where the cap would be on the 3.8?

Thanks,
Paul

rbrown
07-01-2005, 10:31 PM
Looking for both door GFX with hardware. Only the door pieces.

Rodney

racecougar
07-01-2005, 11:13 PM
Paul, I'll try to get you a pic sometime this weekend.

Rodney, I'm all out of GFX right now.

-Rod

snakesm13
07-02-2005, 02:24 PM
wondering if you had a DIS module for an '89 5-speed Thunderbird SC im in need of one bad, not too sure but wondering if anyone could tell me if it matters if it comes of an auto or 5-speed?? i have a 5-speed so if it makes a diff. let me know

thanx
shane

racecougar
07-02-2005, 11:38 PM
Shane, as far as I know, the 89-93 DIS modules were the same for autos and 5-speeds. If you'll send me an email at [email protected] with your zip code, I'll get you a shipped price on one.

-Rod

stangracr
07-03-2005, 10:37 PM
I need a pass door and pass frt fender for a titanium 1989 Super Coupe. Let me know price please.

thanks

lowsc
07-04-2005, 02:24 PM
Im looking for a crank sensor ring that mounts on the balancer I need a new one for my new balancer. Its for the 89 sc auto. I had seen a used balancer on ebay for $20 and didnt bid due tot he fact I didnt know i needed this piece off it mine is bent up. If this was you that had posted that balancer on ebya ill take it for $20 or if you have one around or have just the crank sensor ring and willing to part with just it then Im interested please let me know asap. Email me [email protected] thanks Kevin

07-04-2005, 05:08 PM
Do you have any of the dark red interior stuff from the early years of the SC? Front door panels, rear speaker covers, and a black 5spd console with the fog light swith...


Stephen

racecougar
07-04-2005, 09:42 PM
Stangracr, I have a decent silver passenger side door and fender in stock. If you email me at [email protected] with your zip code, I can send you some pictures and shipped prices on the parts. Just to warn you though, frieght for the door is pretty expensive.

Kevin, I don't have that ring available at the moment.

Stephen, I do have a 90 XR7 with the dark red interior. If you'll email me at [email protected] with your zip code, I'll send you some pics and shipped prices. I can't remember off the top of my head what condition that interior is in.

-Rod

racecougar
07-07-2005, 09:46 PM
Just want to let everyone know that I will be out of town this Friday and Saturday (7/8 and 7/9). I'll try to respond to everyone's emails and posts as soon as I get back on Sunday.

Thanks,
Rod

BT Motorsports
07-10-2005, 02:30 PM
Rod, do you have an engine harness for a 90 auto without EGR?

Paul

racecougar
07-10-2005, 10:20 PM
Paul, I just sent you an email about the engine harness.

-Rod

cap320
07-11-2005, 03:52 PM
Bump.

-Rod
Do you have a spanner wretch for the upper IC tube? Thanks

racecougar
07-11-2005, 07:30 PM
Do you have a spanner wretch for the upper IC tube? Thanks

I don't sell/rent/loan my tools.

-Rod

racecougar
07-15-2005, 08:53 PM
bump.

-Rod

wigglesrewind
07-23-2005, 04:21 AM
SC wheels? i need one wheel in good shape w/o the center cap if that makes it cheaper, if not i'll take the centercap too.

also what do you get for fog lamps for a 92 sc and do you have any?

racecougar
07-24-2005, 04:07 AM
wigglesrewind, I have a full set of recently refinished 89-92 style SC wheels in stock in excellent shape. However, I'll only sell them as a complete set. If you're interested in a shipped price on the set, please email me at [email protected] with your zip code.

I don't have any good foglights in stock at the moment.

-Rod

wigglesrewind
07-24-2005, 01:45 PM
rod, thanks but i already have 7 sc wheels lol, just looking for an extra one so i can have 2 sets and spend some time polishing up one of them.

rallystang
07-25-2005, 03:14 PM
Hows it goin? My SC swap is in progress... I need a A/C Compressor... And if you have a set of belts in decent shape... How much to 80911?

racecougar
07-26-2005, 01:13 PM
rallystang, I just sent you a PM.

-Rod

racecougar
07-30-2005, 10:57 PM
bump.

-Rod

racecougar
08-07-2005, 11:50 PM
I just picked up a 5.0L engine from a 91-93 MN12 today. If anyone is interested in it, please email me at [email protected] for all of the details.

-Rod

Ira R.
08-08-2005, 01:34 PM
If you happen top have, or come across an old junker, I need the spare tire tie down hardware for my '95.

ira

Randy N Connie
08-08-2005, 05:44 PM
Rod do you have any aluminum pumpkins from VIII.
Thanks Randy

rickbtbird
08-08-2005, 05:49 PM
I part out MN12's (and build them when I have time ). I currently carry parts from 89-97 3.8L N/A's, 91-93 5.0L's, 94-97 4.6L's, 89-93 SC's (auto's only), and 93-94 Mark 8's.

Do you have one of these? http://www.sccoa.com/forums/showpost.php?p=435563&postcount=1

racecougar
08-09-2005, 02:16 PM
Ira and rickbtbird, I should have the parts that you both are looking for in stock. Please email me at [email protected] with your zip codes for shipped prices and pictures.

-Rod

racecougar
08-31-2005, 03:43 PM
ttt.

-Rod

ThunderDave
10-19-2005, 12:11 AM
ttt.

-Rod

BUMP for Rod!!!! :D ;)

Rod, do you have the trim bezels for the side markers on the front bumper cover? I need both sides.

Thanks! :)

racecougar
10-22-2005, 12:51 PM
David,

Sorry for taking so long to reply. For some reason I didn't receive an email notification. Anyway, I do have a pair of those in stock. If you still need them, please email me at [email protected] with your zip code for a shipped price.

Thanks,
Rod

90blkbrd
10-22-2005, 05:35 PM
Rod,

You wouldn't have an GFX clips that are used on the door. I need one that goes on the door and 1 that goes on the GFX.

Michael

ThunderDave
10-23-2005, 12:46 PM
David,

Sorry for taking so long to reply. For some reason I didn't receive an email notification. Anyway, I do have a pair of those in stock. If you still need them, please email me at [email protected] with your zip code for a shipped price.

Thanks,
Rod

Rod, you've got mail. :)

Ira R.
10-23-2005, 02:49 PM
I am looking for the hose/pipe that runs from the oil cooler to the water pump. I am also looking for the dust cover that fits around the parking brake handle. Both for a '92. Got anything laying around?
Ira

racecougar
10-24-2005, 12:42 PM
Michael, the only ground effects clips that I have are being sold with the complete set of ground effects.

Ira, I know that I have both of those parts, but I'm away at college right now, so I can't search for them. How soon do you need them? Please send me an email at [email protected]

-Rod

BT Motorsports
10-24-2005, 12:49 PM
Michael, the only ground effects clips that I have are being sold with the complete set of ground effects.
Rod, I haven't seen these clips in person, are they something that I can machine as replacements? If so, please email me some pics.

Thanks,
Paul

XxSlowpokexX
10-24-2005, 01:00 PM
Paul the clips are nylon or some kind of plastic. If its netal they would need to be resiliant enough to spring and of course..Not rust

BT Motorsports
10-24-2005, 01:02 PM
Paul the clips are nylon or some kind of plastic. If its netal they would need to be resiliant enough to spring and of course..Not rust
I have a place that makes nylon clips to order, once I see what they are like, I will ask for a quote and min. quantity.

Paul

racecougar
10-24-2005, 01:02 PM
Paul,

Next time I'm over at my shop I'll try to remember to get some pics of the clips for you.

-Rod

ThunderTurkey
10-30-2005, 02:20 PM
Rod-
How much for a clear/amber turn signal lens for the Drivers side, shipped to 85345 ? :)
-Tom

racecougar
10-31-2005, 09:35 PM
Tom, you have a PM.

-Rod

seawalkersee
11-04-2005, 11:37 PM
Rod, we talked about your aluminum 3.73 setup for sale. How long of a wait is there going to be on this? I truely just want to get one but I want to step up to an aluminum housing. Soooooo....if its gonna be a while, ya got one in stock? Or...can you leave your car parked,like, really close to the road in a few nites? :D

Chris

90blkbrd
11-05-2005, 08:04 AM
I have a place that makes nylon clips to order, once I see what they are like, I will ask for a quote and min. quantity.

Paul


Paul,

Sorry, I missed these posts and didn't realize they were about the clips I need. I am attaching photos. If you need more just ask.

Michael

A sc need 4 GFX clips, 2 per side and 12 door clips, 6 per side.

in order:
door clip back
door clip front
front gfx clip back
front gfx clip front
front gfx clip side

racecougar
11-05-2005, 01:22 PM
Rod, we talked about your aluminum 3.73 setup for sale. How long of a wait is there going to be on this? I truely just want to get one but I want to step up to an aluminum housing. Soooooo....if its gonna be a while, ya got one in stock? Or...can you leave your car parked,like, really close to the road in a few nites? :D

Chris


Chris, it will be a few months before the FRPP centersection is up for sale. I won't have the time to install the 4.10 centersection into the car until winter hits, and I also want to make sure that I like the 4.10 centersection before I sell the FRPP one.

I don't have any other aluminum centersections for sale at the moment.

-Rod

seawalkersee
11-05-2005, 07:22 PM
Sum beach...Well, If you run across any, let a brutha know. How much do you usually get fer one?

Chris

91SuperCoupe
11-06-2005, 12:39 PM
Hi do you have engine wiring harness for sale please let me know andgive me a price on it with shipping included the area is 48081 please email at [email protected]

racecougar
11-06-2005, 07:15 PM
Chris, I'm not sure what I will sell the FRPP centersection for yet.

91SuperCoupe, you have mail.

-Rod

Blown 91 Bird
11-06-2005, 07:48 PM
you have a PM, thanks.

M90TAURUS
11-06-2005, 10:40 PM
Rod, Im putting a SC engine in a fox body mustang, so I need the whole wiring harness, I dont care about lights or cluster or those accesories, but I would need the fuel pump part and all that stuff. Also, I read you only stock auto stuff, would this harness work for a manual or no? Thank you-AJ

thebigslide
11-07-2005, 06:55 PM
Rod, do you have any clutch pedals, hand brake handles, e-brake cables and clutch linkages for a 91 thunderbird? Also looking for extra 5.0L engine mounts for a '91 T-Bird

racecougar
11-08-2005, 08:01 PM
AJ, I don't have a harness available that would work for you at the moment.

thebigslide, I should have a good hand brake handle and possibly the e-brake cables in stock. I'll need to know which cables you need. I don't carry any 5-speed related parts, and I don't have any 5.0L motor mounts in stock at the moment. Please email me at [email protected] with your zip code for a shipped price on the handle and e-brake cables.

-Rod

90blkbrd
11-19-2005, 09:48 PM
Rod,

I am sorry I am using your thread, but I wanted to update the information on the clips.

I didn't realize that the 2 clips on the GFX are different. The one in the previous post is toward the front of the car on the GFX.

I have attached photos of the one I need at the rear of the car on the GFX.

In order:
rear clip back side
rear clip front side
rear clip side shot.

Please note that I did do a repair job on this clip. The first 2 attempts were by epoxying the bolt back in the clip. This attempt I drilled through and then purchased a bolt and epoxyed it on.

racecougar
11-19-2005, 10:17 PM
No problem, 90blkbrd.

-Rod

11-19-2005, 10:27 PM
rod i messaged you on grouper.

you got a 96-97 hood opener slider thing? The thing that slides on the header panel and pops the hood, mines to short, i did the swap but my thing is to short.

Tyler



P.S. someone is ganna take this wrong "i did the swap but my thing is to short.":D

seawalkersee
11-19-2005, 10:32 PM
rod i messaged you on grouper.

you got a 96-97 hood opener slider thing? The thing that slides on the header panel and pops the hood, mines to short, i did the swap but my thing is to short.

Tyler



P.S. someone is ganna take this wrong "i did the swap but my thing is to short.":D
Huh Huh...your thing is too short...now you REALLY wanna kill me:D

Chris

11-20-2005, 08:50 AM
Huh Huh...your thing is too short...now you REALLY wanna kill me:D

Chris

I knew youd be the one:p :p


Tyler

racecougar
11-20-2005, 04:10 PM
Tyler, you have a PM.

-Rod

ThunderDave
11-21-2005, 06:15 PM
I knew youd be the one:p :p


Tyler

Y'all get a room.:eek: :p :D

Slider thing?:confused:

trife86
11-23-2005, 07:59 PM
Im looking for 1 early SC Wheel in good shape to replace a bent one, Shoot me a price shipped to 10305

walter89
11-25-2005, 01:31 PM
looking for a drivers side door for an 89 with keyless entry. dont matter what color the car is probably going to be repainted. How much shipped to 61254? Im assuming its not going to be cheap those doors are heavy things.

racecougar
11-25-2005, 02:41 PM
trife86 and walter89, you both have PMs.

-Rod

Terrible Juan
11-25-2005, 08:59 PM
Got any 5 or 10% pulleys?

racecougar
11-25-2005, 10:12 PM
Got any 5 or 10% pulleys?

Nope. I mainly just carry stock parts.

-Rod

racecougar
12-04-2005, 12:11 AM
ttt.

-Rod

onemikedown
12-07-2005, 11:22 AM
I need the rear e-brake asembly for 89 5 speed how much shipped to 12651?

racecougar
12-07-2005, 05:50 PM
Exactly which piece are you looking for? Do you happen to have a picture of the part?

-Rod

onemikedown
12-07-2005, 11:06 PM
its the 2 cables that come out from the spring tensioner on the back axel and go to the rear brakes.Id also take the tensioner. I'll see if I can take a pic tommarro when its lighter out.

rikuo
12-08-2005, 05:36 PM
Do you have any available?
send me a PM if so
thanks
Larry

racecougar
12-11-2005, 09:45 PM
onemikedown, you just need the two rear e-brake cables and the tensioner assembly? I should be able to get those parts for you. I'll send you a PM about it.

Larry, I don't have any SC HB's in stock at the moment.

-Rod

onemikedown
12-12-2005, 10:59 PM
just need to know your paypal acct.

90coug
12-13-2005, 11:30 AM
Hey race, have you got a red front bumper for a 90 cougar xr7?

Capt.Trunks
12-14-2005, 01:33 AM
Working Break Boostedr Accumalator ball?

racecougar
12-15-2005, 03:25 PM
Working Break Boostedr Accumalator ball?

Sorry, I don't have one available at the moment.

-Rod

Capt.Trunks
12-18-2005, 10:26 PM
Heads for a 92 around 170,000??? all i got is 60 bucks right now adn i dont have a car to get back to work in if ya could help i will never forget it

racecougar
12-19-2005, 07:34 PM
Richard, I responded to your post on my thread at tccoa.com.

-Rod

PjsBird
12-23-2005, 10:11 AM
Hello there sir. I need a few black interior items

black driver side kick panel
both front seatbelts (male and female)
black weatherstripping from doors
rear middle seatbelt (male and female)
both panels that are hidden by the rear seat. unsure of what they are called... but they are plastic interior panels...

please let me know how much for all of the above, shipped to v7c 1k6 (vancouver canada)

Will trade good condition grey leather door panels if you need them

my e-mail is [email protected] pls dont PM, as i am rarely on here. thank you in advance.

racecougar
12-26-2005, 06:39 PM
PjsBird, you have mail.

-Rod

seawalkersee
12-26-2005, 10:57 PM
You have an SC airbag out of the air bag cars? The whole steering wheel if you got it. What about the trim that goes around the radio and shifter for a 97? It has to be perfect.

Chris

racecougar
12-29-2005, 02:06 PM
Sorry Chris, I can't help you out there.

Also, for some reason I'm not receiving reply notifications on this thread. So it may be best to email me directly at rodsv6c[email protected] for parts requests.

Thanks,
Rod

jonroe
01-01-2006, 06:47 PM
Rod,

I'm looking for coolant hoses (in good shape) into and out of the oil cooler for my 93 SC manual. I especially need the rubber-steel hose that goes down from the water pump to the oil cooler.

Jon

Capt.Trunks
01-01-2006, 11:29 PM
hahaha heres somthing you should have i need good cats for my 93 5.0 bird...

racecougar
01-02-2006, 05:13 PM
Sorry guys, I don't have those parts in stock right now.

Once again, I'm not receiving email notifications on this thread for some reason. If you have an urgent parts request, it would be best to email me at [email protected]

-Rod

WinnipegSC
01-04-2006, 08:43 PM
Lookin for a set of 94 - 95 black leather seats .. if u know of any or have some that would be great also do u know if the 89-93 seats will fit in place if all parts are aquired(front and back)

racecougar
01-05-2006, 02:09 AM
Sorry, I don't have any good black leather seats in stock. 89-93 seats will bolt right into a 94-95.

-Rod

WinnipegSC
01-05-2006, 04:34 AM
by any chance would u have some ~~~~~~ all power seats with decent foam left ?? that u willing to let go of for a good price?

racecougar
01-23-2006, 10:00 PM
ttt

-Rod

johnlx302
01-24-2006, 06:30 PM
you have mail!!!!!:)