sho taurus
05-20-2005, 11:16 PM
I'm posting this for a friend. He doesn't want to sale his truck but he wants to buy a house. So the truck has to go. It is a super clean truck. He is a mechanic at a Lincoln dealership in Richmond. So you know everything is done right on the truck.
PRICE REDUCED! $29,500! please spread the word...
Hey guys, for those who don't already know, I've decided to put my truck on the market. I just signed a contract on a house and I need every penny I can scrape together for the downpayment.
The price is negotiable. by that I mean, the asking price as it sits is $29,500 but there are several parts that could be removed that could reduce the selling price further.
--> $29,500 <--
If you don't know the truck, it has ALOT of mods, except for a KB. I've got 60 grand in it without counting any labor time, it has run 10s, has made nearly 700hp/900+ft/lbs at the wheels, and runs EASY 11s in street tune on pump gas without any n2o. A brand new JDM built motor that has never been raced, sprayed, or abused was just installed in December totally streetable, it's my only vehicle, so I drive it everyday, everywhere near and far.
Here is a video of the truck making 699rwhp and 915rwtq click for video (http://www.f150online.com/forums/link.cfm?link=http://www.nvlope.org/_video/sfnosdyno.wmv)
if you want info, or know someone who does, please contact me here:
MILLERDOG at COMCAST dot NET
here's a list of SOME of the mods:
new JDM built long block (under 5000 miles and never raced)
PI converter
JDM long tubes/full exhaust
Apten ported eaton, smoothed, and custom painted Sonic blue
NX 150 kit (edit: SOLD)
JDM e-fan
meziere e-pump
twin 255lph fuel pumps
60lb/hr injectors
8lb pulley
autometer gauges (boost, water temp, fuel pres, nitrous pres)
DVD/Navigation/XM custom stereo (edit: SOLD)
chrome 03-04 wheels
two BRAND NEW f1s. (literally only a few days old, had 1 blowout)
QA1 shocks all around
Fluidyne heat exchanger
custom paint, and powdercoating on engine parts (very nice)
metco idlers
bedrug
factory tech valve body and tranny cooler
SCT
PSP driveshaft loop
Hotchkis full lowering springs all around plus matching swaybars
3M stoneguard applied since truck was 1 week old
Optima battery
painted fiberglass air intake w/ 12" filter
probably lots more that I'm forgetting.
thanks,
chris
more info here:
http://www.nloc.net/forum/showthread.php?s=&threadid=96459
PRICE REDUCED! $29,500! please spread the word...
Hey guys, for those who don't already know, I've decided to put my truck on the market. I just signed a contract on a house and I need every penny I can scrape together for the downpayment.
The price is negotiable. by that I mean, the asking price as it sits is $29,500 but there are several parts that could be removed that could reduce the selling price further.
--> $29,500 <--
If you don't know the truck, it has ALOT of mods, except for a KB. I've got 60 grand in it without counting any labor time, it has run 10s, has made nearly 700hp/900+ft/lbs at the wheels, and runs EASY 11s in street tune on pump gas without any n2o. A brand new JDM built motor that has never been raced, sprayed, or abused was just installed in December totally streetable, it's my only vehicle, so I drive it everyday, everywhere near and far.
Here is a video of the truck making 699rwhp and 915rwtq click for video (http://www.f150online.com/forums/link.cfm?link=http://www.nvlope.org/_video/sfnosdyno.wmv)
if you want info, or know someone who does, please contact me here:
MILLERDOG at COMCAST dot NET
here's a list of SOME of the mods:
new JDM built long block (under 5000 miles and never raced)
PI converter
JDM long tubes/full exhaust
Apten ported eaton, smoothed, and custom painted Sonic blue
NX 150 kit (edit: SOLD)
JDM e-fan
meziere e-pump
twin 255lph fuel pumps
60lb/hr injectors
8lb pulley
autometer gauges (boost, water temp, fuel pres, nitrous pres)
DVD/Navigation/XM custom stereo (edit: SOLD)
chrome 03-04 wheels
two BRAND NEW f1s. (literally only a few days old, had 1 blowout)
QA1 shocks all around
Fluidyne heat exchanger
custom paint, and powdercoating on engine parts (very nice)
metco idlers
bedrug
factory tech valve body and tranny cooler
SCT
PSP driveshaft loop
Hotchkis full lowering springs all around plus matching swaybars
3M stoneguard applied since truck was 1 week old
Optima battery
painted fiberglass air intake w/ 12" filter
probably lots more that I'm forgetting.
thanks,
chris
more info here:
http://www.nloc.net/forum/showthread.php?s=&threadid=96459