Anyone use 1.83 rockers on SC??

I use 1.80's but haven't tried 1.83's. The 1.80's are studmounts, and they need a lash cap to cover the tip swing.

Morana has a 1.80 pedestal set but it's pricey - around $450. You can probably get some from a shop that sells hipo stuff for a 460 Ford.
 
Hey Fred

You used them with or without stock cam..I was looking into the bolt down type rather then get a cam...Which Im not to interested in...
 
Then check either Morana's website or a hipo Ford place for 460 rockers. You can go to 1.80 on the stock cam with no clearance problems at all, piston wise or head wise. Bone Stock heads will tolerate .500 lift, but not an aggressive ramp (weenie springs).

Me, I'm in a bit different class with the 4.3, lifting well over .600". It's almost done . . . .


4.3 Pix :D You'll want to scroll to the bottom of the thread.
 
Back
Top