To The Top

Are you talking about the part surrounding the shifter? If you are doing a 5 speed swap yes.
If you are talking about the padded door, they are all the same.
 
If you're just talking about the top fitting onto the console base, I think they're the same. If you're talking about fitting a 5 spd console top on top of an AOD shifter or an AOD top on a 5sp shifter, it won't fit. The 5 spd hole is bigger and more of a square to accomodate the side-2-side motion which isn't need for the AOD shifter.
 
Last edited:
I'm talking about the actual console top, that you can take off to gain access to the shifter of switches. I know the aod top has a more rectangle opening for the shifter and the 5 speed is more square.

I was just something I was curious about because I had a Manny moment. :eek: :D :cool: It didn't include inverting the top though. :D ;)
 
Back
Top