How in the world do I remove the driveshaft oil seals in the differential?

CaifanSC

SCCoA Member
I want to change the driveshaft oil seals on the 3.27 pumpkin going into my 94 but im having a hell of a time 'trying' to get them out. They just do not budge! I've been messing with one of them just strying to pry it out with a large screw driver but it just breaks the rubber, but the entire seal is still there and does not seem to move. Any suggestions? DO i need a special tool? Thanx!
 
CaifanSC said:
I want to change the driveshaft oil seals on the 3.27 pumpkin going into my 94 but im having a hell of a time 'trying' to get them out. They just do not budge! I've been messing with one of them just strying to pry it out with a large screw driver but it just breaks the rubber, but the entire seal is still there and does not seem to move. Any suggestions? DO i need a special tool? Thanx!
Yes.. A small drill bit and a couple of sheet metal screws.. Drill 2 holes smaller than the screws about 180 apart, then insert the screws. Then use the heads to pry out the seals. :cool:
 
Back
Top