Help with fuel pump..

kpatton

Registered User
My shop manual shows 2 different pumps. One for sc one without. I've called around and have found many parts stores show 1 pump for both...
Carter shows only 1 (non-sc ), trw shows 2, napa shows 1, delco shows 1

did the other manufactures make only the highoutput so it works for both or will I put hrs of work changing it out only to find out it did not work?
thanks Keith
 
Keith, I wouldn't take a chance on getting the wrong pump from one of those suppliers. Very few know anything about specific SC requirements. But, if they can show it flows at least 110lph (liters per hour) then that meets stock specs. However, why don't you buy it from one of the vendors that advertize on this site? Then you know you're getting what you need. You can upgrade to 190lph, 255lph or 255lph forced induction depending if you are planning any higher performance upgrades in the future. And their prices usually beat the chain stores. I got mine from mn12performance, but there are several others. The kits are Holley but the pumps are made by Walbro. John
 
Back
Top