Early model SC pulley on a 94

blue94sc

Registered User
Ok, here's the rub.
I am planning on installing an early model SC pulley on my 94 and was wondering if the belt length will be an issue.
Currently it is a real pain to get the belt on with the stock pulley.
Since the early pulley is only 3% smaller would the stock belt suffice?
Also, I would like to replace my tensioner pulleys and would like to know if the 70mm SC tensioner pulley can be replaced with a 76mm?
It seems that most of the aftermarket steel and aluminum pulleys are only available in 76mm.
Thanx!
Bill
 
Yes stock belt is fine.

You can use the tensioner for a late Cobra, just make sure it rides evenly on the belt. I used them on all three, also I think SCP or somebody sold a "kit".
 
Back
Top