PDA

View Full Version : 5.0 5Spd. 89 SC for sale.


SCCoupe50
07-07-2005, 02:37 PM
Ok guys. I have an 89sc with 16x,xxx miles on the chassis. It has a freshened 5.0 installed in front of an M5R2 tranny. The tranny is currently out of the car. I took it to the track and on the first run took out the input shaft gear and the counter shaft. I have replaced these. I put in a brand new slave cylinder and have a replacement clutch hose for it. The car ran fine (but needs tuned) before I broke the tranny. All of the MODS are below. I will add them as I remember them. I need to get $3000 for this car or I will just part it out and get the 3k that way. I am near Hagerstown, Maryland. If you buy this car you can take whatever else I have that includes another 89 SC auto. On this second tbird, I cut the top off to make a convertable and quickly found that the amount of work involved was far too much. So, I tacked the top back on and here it sets. This bird has no engine or tranny installed, but I still have the auto tranny for it. I also have an SC 3.8 engine that I converted to naturally aspirated for a turbo project that went so, so. This engine has a knock and is still assembled. The block is o-ringed and the heads slightly ported. I also have some other little stuff laying around that can go as well. I am buying a Supra today and want to clear all this tbird stuff outta my garage. Now on with the mods. The 5.0 car is white with red cloth, the other titanium with red cloth.

The following mods have less than 500 miles on them.

TFS Trickflow heads
TFS 1.6 roller rockers
TFS valve covers
TFS-R intake
TFS pushrods
BBK 75mm throttlebody
Tweecer R/T
Freshened shortblock with forged pistons and plasma moly rings
Brand New, Just installed Cirvini's Mach I hood.
Added: F303 cam

Items with over 500 miles on them.

Pro-m 75mm MAF
42lb injectors (less than 500 miles since being cleaned and flow tested)
MAC shorty headers
A9P ECU


Thats about all I can think of at the moment.

CaifanSC
07-07-2005, 03:40 PM
Sent u a PM friend.