PDA

View Full Version : Magnaport II and Inlet Plenum

Brandon
07-13-2005, 09:08 PM
I have a Magnaport II blower and MP Inlet plenum I'd like to sell. The MPII consistently pulls 17-18psi on my car. One of the holes for the top are stripped, but would be an easy fix. The Inlet plenum has a rub mark on the top where it used to hit my hood. Otherwise they are in good condition...they're both powdercoated, not polished. If you need pics I can take some. I'd like to sell these as a pair. Reason for selling you might ask???....just upgrading. I'm looking to get $1000 for the pair. Email me at LZ1276@zoominternet.net
kwikcoupe
07-13-2005, 09:12 PM
overall condition internally, miles used, what exhaust did you have to get 18 psi. Must have been pretty restictive. Hows the seat of the pants dyno when you put this on? Mike

edit: sorry forog tto ask with or without egr, if without is it possible to get the adapter from MP?
Brandon
07-13-2005, 09:41 PM
Honestly I don't know how many miles...I bought it used and have put maybe 3,000 miles on it. It doesn't leak oil or anything though. I have no overdrive whatsoever, 2.5" duals, and get 18 psi....the reason for this is my heads are the last restrictive thing in the system. Seat of the pants dyno was impressive...I dropped 4/10's in the 1/4 and that was bogging off the line....would've been a much greater increase.

This is without egr....it just has a block off plate...I'm sure your EGR could be hooked up to it.

overall condition internally, miles used, what exhaust did you have to get 18 psi. Must have been pretty restictive. Hows the seat of the pants dyno when you put this on? Mike

edit: sorry forog tto ask with or without egr, if without is it possible to get the adapter from MP?
wezar
07-13-2005, 10:51 PM
You can buy the EGR fitting from MP website.

http://www.magnumpowers.com/tbrd_cart.html
DirtySouthBird
07-14-2005, 03:39 AM
how much for just the plenum?
thanks,
drty
Brandon
07-14-2005, 06:57 AM
how much for just the plenum?
thanks,
drty

$400 plus shipping.
victor malvar
07-14-2005, 01:08 PM
Hello,We also sell the egr block off kit the plate and the bolt if you need to shut off egr tube fro exhust maifold! $ 22.00 $1.50 $23.50 total Nice job done with chome bolts for headers. We do not have the small bolt you can use the one of of you egr. We have this kit, we will list them now in our store.
give it 20 minutes.

Thanks again,
Victor and Diane

Please click on the link below to receive the newest listings, special promotions and discounts on some shipping charges. This will also help you save on shipping charges for multiple purchases. You must click on this link every time you purchase an item to receive benefits. Thanks for shopping with Spinningwheels-SC and save this link for future purchases.
Click here; http://stores.ebay.com/Spinning-Wheels-SC?refid=store
Brandon
07-14-2005, 05:15 PM
If these don't sell soon, they're going up on eBay.
Brandon
07-15-2005, 06:10 PM
Plenum is sold.....MPII is still up for grabs. Email address is above.
Brandon
07-16-2005, 10:51 PM
MPII is still available. Pics upon request. It's going up on eBay soon.
Brandon
07-18-2005, 05:10 PM
MPII is still available. Pics upon request. It's going up on eBay soon.

Bumpety bump
LightEMup
07-18-2005, 10:30 PM
how much u want for the MPII?
Brandon
07-18-2005, 10:32 PM
how much u want for the MPII?

$600 + shipping.
Brandon
07-18-2005, 10:34 PM
$600 + shipping.

Here's a few pics
victor malvar
07-18-2005, 11:29 PM
Here's a few pics



It Looks nice...Good price, If you had one of our pulleys on the front it would perfect the pulley paint take away from it look....Or does it. Good price. I have been getting 17 or 18 psi out of mine with the power pulley! It's priced right. I'ts hard to pass up. Say hi to kevin for me.

Take care!
Victor......