rear spring install

Sharon Silver

Registered User
I'm fixing to put lowering springs in my car but I've never had the rear end apart. Anything special about removing and installing the rear springs I should know about?
 
The Spindle Has To Be Unbolted From The Upper Control Arm And The Shock Comes Off The Lower Control Arm. Pry Like A Mo-fo To Get The Lower C/a Down To Where The Spring Comes Out.
 
Jack the car WAY up in the back and you will have room to swing the control arm down. it's a lot easier with 2 people. remove the swaybar endlink also. make sure you replace the coil spring isolators with new ones.
 
Make sure your upper control arm to frame bushing has the essentric bushing in it....

If you don't, use Moog K-8562 and you will be able adjust the camber on the rear tires when you have them aligned.....
 
Back
Top