Randy N Connie
Registered User
What year of VIII aluminum rearends fit under a 1990 SC.
Did a search could not come up with anything.
Thanks Randy
Did a search could not come up with anything.
Thanks Randy
BirdofPrey97 said:Marks are actually FN10s.
DamonSlowpokeBaumann said:All of em
The 99 Cobra pumpkin works as well and is your best bet if you can find one. It will hav ea posi unit wheras the Mark may not.
Also unsure if there is a design difference betwene the two
Randy N Connie said:Damon don't the Cobra IRS pumpkins have 32 splines, & the markVIII
and SC Bird have 28 splines? Forgot the exact numbers.
Randy
Like Damon said. I used an F-150 S-spring when I rebuilt my traction-lok last year. It's held up great. It was a little challenging to get the spring to fit. I found some good articles over at Corral.net that detailed all of the steps of the rebuild...including using stainless-steel hose clamps to compress the spring far enough so it could be installed.Randy N Connie said:I remember reading about using F-150 traction-loc
parts, would these be the best parts to use for
traction-loc rebuild part?
Thanks Randy
Kurt K said:Like Damon said. I used an F-150 S-spring when I rebuilt my traction-lok last year. It's held up great. It was a little challenging to get the spring to fit. I found some good articles over at Corral.net that detailed all of the steps of the rebuild...including using stainless-steel hose clamps to compress the spring far enough so it could be installed.