odd sway bar size or what

Dahoopd

Registered User
I found this info doing the search. it states that my rear is a 1.04 but azone only carries 1.06, 1.09 and 1.12. Are the end links available for the 1.04. Thanks




Year 3.8L SC 5.0L/4.6L
1989
Front 1.10"** 1.20"** N/A
Rear 1.00"** 1.10"** N/A
1990
Front 1.10"** 1.20"** N/A
Rear 0.98"** 1.04"** N/A
1991
Front 1.10"** 1.20"** 1.10"**
Rear 1.04"* 0.90"** 1.04"*
1992
Front 1.09"** 1.12"** 1.12"***
Rear 1.04"* 0.90" ** 0.94")(*)(***
1993
Front 1.06"** 1.10"** 1.06"**
Rear 1.04"* 0.90" ** 0.94"**
1994
Front 1.06"** 1.10"** 1.06"**
Rear 1.04" * 0.90"** 0.94"**
1995
Front 1.06"** 1.10"** 1.06"**
Rear 1.04"* 0.90"** 0.94"**
1996
Front 1.06"** N/A 1.06"**
Rear 1.04"* N/A 0.94"**
1997
Front 1.06"** N/A 1.06"**
Rear 0.94"** N/A 0.96")(**)(***

.
 
Any special reason why you are replacing your sway bar? I'd say most SC guys have gone with a bigger bar from Addco, like the 1.1/8" (roughly equals the 1.12" size) and if you've lowered the car then Addco supply the appropriate shorter links. If we know your intensions we can provide better guidance.
 
Actually, I was going to replace the end links. I dont think they are needed by the looks of them. I have gotten under the car and beat on everything with a mallet and I still have this rattling like keys on both sides of the rear over even the smallest of bumps. It drives me crazy.

Like I said in previous posts, I dont have every tool to diagnose most problems so I just try to figure out what the problem is and start replacing things. Cant hurt. Eventually, I will have a $40,000 car thats worth maybe $5000.....lol
 
Back
Top