90XR7Cougar5spd
Registered User
I got my motor out as some of you already know. I took it out because i had a rod knocking. I took off the heads, and oil pan and cylinder walls look pretty good, although last time it was running it was running really rich. Anywho, Should i just put new Main and rod bearings in it or rebuild the whole thing. Im kinda working on a budget and want your opinion. I have not looked at the crank yet so i dont know if i will have to have it turned or buy a new one.
Also, there was JB weld on the bottom of the oil pan, it never leaked on me the last time i drove it 3 years ago, should i go ahead and buy a new oil pan or just put the old one back on it.
Thanks
Derek
Also, there was JB weld on the bottom of the oil pan, it never leaked on me the last time i drove it 3 years ago, should i go ahead and buy a new oil pan or just put the old one back on it.
Thanks
Derek