PDA

View Full Version : F/S ton of sc parts 89-95



ww0001
09-01-2005, 09:41 AM
Ive got a ton of parts for both early and late model sc and lx and most non drive train pieces for early (87) mk7.No longer have any sc stamped front bumper covers though.Have window motors sunroof motors
Inquire to [email protected]
will post list with prices soon thanks,Wayne

chulosdream
09-01-2005, 09:28 PM
just wondering if you had the blower off the 94 and how much shipped to new mexico 87108

ww0001
09-02-2005, 08:53 AM
just wondering if you had the blower off the 94 and how much shipped to new mexico 87108

I would like to get $450 and shipping for the blower and inlet off the 94.Car shows 73000 on the clock

ww0001
09-02-2005, 09:06 AM
Ive got a ton of parts for both early and late model sc and lx and most non drive train pieces for early (87) mk7.No longer have any sc stamped front bumper covers though.Have window motors sunroof motors
Inquire to [email protected]
will post list with prices soon thanks,Wayne

1 set of NEW aftermarket 94 headlights gave 104 each for them take $130 shipped for the pair

1 set New aftermarket front turn signals cost $40 take $30 each shipped

1 new header panel $75 shipped

1 new air cond condensor $80 shipped

1 140 mph speedo assembly $150 shipped approx. 73000 on clock

1 new auto radiator $130 shipped

1 new ford pusher fan assembly

Door window motors $30 shipped

Sunroof motors $35 shipped

Most sensors and computers switches-Interior parts marroon

Several console parts red gray tan lids bases tops

5sd tranny out of 89sc and pedals etc

All stated shipping is in the us pricing is negotiable more to come

bbird94
09-02-2005, 03:12 PM
How's it going,

I will take the '94 headlights and the new AC Condenser, the condenser, is it for a '94 because I understood that AC condensers through the years changed hardware mounts?

Other things I was hoping you would have from a 94,95:
- HVAC fan the fan that is in between the condenser and frt bumper
- drivers side front hub spindle

If you have any of this that would be awesome, just let me know!!

See Ya,
Brandon

CaifanSC
09-02-2005, 06:04 PM
Wondering if you happen to have any engine parts from a 94-95 engine. IM looking for a windage tray. Also, looking for the black plastic trim piece that surrounds the gauge cluster on 94-95 birds...the piece that has the rear defroster switch....but with the cell phone buttons. Thanx

ww0001
09-02-2005, 10:17 PM
How's it going,

I will take the '94 headlights and the new AC Condenser, the condenser, is it for a '94 because I understood that AC condensers through the years changed hardware mounts?

Other things I was hoping you would have from a 94,95:
- HVAC fan the fan that is in between the condenser and frt bumper
- drivers side front hub spindle

If you have any of this that would be awesome, just let me know!!

See Ya,
Brandon

At this time im not going to sell spindels etc because i dont want to dis able it yet.I do have a front fan.It has a mount tab broke I think but runs and is usable.I will send it with lights and condensor for $250

Thanks,
Wayne

ww0001
09-02-2005, 10:19 PM
Wondering if you happen to have any engine parts from a 94-95 engine. IM looking for a windage tray. Also, looking for the black plastic trim piece that surrounds the gauge cluster on 94-95 birds...the piece that has the rear defroster switch....but with the cell phone buttons. Thanx

Sorry cant help you with that.I am going to sell engine whole as it has just 73000 miles on it

trife86
09-02-2005, 10:37 PM
do you by any chance have a 92 MAF the 70mm one for 30lb'ers

ww0001
09-02-2005, 11:43 PM
do you by any chance have a 92 MAF the 70mm one for 30lb'ers

Seems like I should have 1 but will have to look to be sure

jc91sc
09-03-2005, 09:56 AM
Do you still have that 94 blower??? If so I'd like to take it off your hands.

James E.
[email protected]

ww0001
09-03-2005, 11:12 AM
Do you still have that 94 blower??? If so I'd like to take it off your hands.

James E.
[email protected]
Blower still availible 450 + shipping for blower and inlet first with $$$ get blower

x182dan
09-04-2005, 06:28 PM
how much for the tranny and mileage and condition, and was your 94sc auto or 5spd? Thanks Dan

ww0001
09-04-2005, 10:49 PM
how much for the tranny and mileage and condition, and was your 94sc auto or 5spd? Thanks Dan

Mileage unknown was working perfect when car clipped bridge rail body had about 125k but trans had been changed as was engine twice $350 +shipping it is out of 89 My 94 is an auto car that trans is $650 +shipping 73k miles

ww0001
09-06-2005, 09:15 AM
Mileage unknown was working perfect when car clipped bridge rail body had about 125k but trans had been changed as was engine twice $350 +shipping it is out of 89 My 94 is an auto car that trans is $650 +shipping 73k miles

Blower still for sale

ww0001
09-08-2005, 09:18 AM
Blower still for sale
94 headlights and condenser still for sale 145 mph speedo cluster also

trife86
09-08-2005, 11:03 AM
did you check at all for a 92 maf?

ww0001
09-08-2005, 10:42 PM
did you check at all for a 92 maf?
I looked and couldnt find it so must assume its gone got one off 94 lincoln 4.6 though

Ira R.
09-08-2005, 11:36 PM
You still have the pusher fan for the '94?? How about the ride computer for a '92?

Ira

ww0001
09-08-2005, 11:54 PM
You still have the pusher fan for the '94?? How about the ride computer for a '92?

Ira

I have a new ford pusher in this car Cost over $400 still have receipt cant believe I gave that for that.make reasonsable offer.I think the arc controller was the same till 93.If so i have 1 for $35 shipped.Thanks,Wayne

SloMo228
09-09-2005, 03:05 PM
Do you have any 5-speed cars? If so, I need the brake and clutch pedal assembly out of one. Thanks.

Ira R.
09-09-2005, 05:01 PM
I have a new ford pusher in this car Cost over $400 still have receipt cant believe I gave that for that.make reasonsable offer.I think the arc controller was the same till 93.If so i have 1 for $35 shipped.Thanks,Wayne
What the...?? 400 for the pusher fan? Is that for the stock intercooler? What kind of fan did you get? Could you maybe send a picture to me at [email protected]

Ira

ww0001
09-09-2005, 11:04 PM
What the...?? 400 for the pusher fan? Is that for the stock intercooler? What kind of fan did you get? Could you maybe send a picture to me at [email protected]

Ira

Its ford oem fan assembly for a sc.The one that goes on the radiator in front of water pump.Ford list on just the motor is over $200 I didnt realize they where that high almost fell over.

ww0001
09-09-2005, 11:06 PM
Do you have any 5-speed cars? If so, I need the brake and clutch pedal assembly out of one. Thanks.
I have one set.Not sure if I want to part with them what they worth to you?Thanks,


Wayne

Ira R.
09-09-2005, 11:23 PM
Its ford oem fan assembly for a sc.The one that goes on the radiator in front of water pump.Ford list on just the motor is over $200 I didnt realize they where that high almost fell over.
Thanks anyway. Too rich for my blood.

Ira

ThunderCoupe
09-11-2005, 02:23 PM
If your willing to sell the 5-speed tranny without the pedals, i'd be interested ;) that is of course if it's still up for sale... discuss price? any known details? i'm assuming it still works? shipping will probably be difficult... so where are you located? might be able to work out a pick up. PM with more info.

ww0001
09-13-2005, 11:28 PM
If your willing to sell the 5-speed tranny without the pedals, i'd be interested ;) that is of course if it's still up for sale... discuss price? any known details? i'm assuming it still works? shipping will probably be difficult... so where are you located? might be able to work out a pick up. PM with more info.
You have a pm

ww0001
09-15-2005, 10:29 AM
Following and much more still for sale

1 94 blower and plenum app 70xxx miles $450 + shipping

1 set of NEW aftermarket 94 headlights gave 104 each for them take $130 shipped for the pair

1 set New aftermarket front turn signals cost $40 take $30 each shipped

1 new header panel $75 shipped

1 new air cond condensor $80 shipped

1 140 mph speedo assembly $150 shipped approx. 73000 on clock

1 new auto radiator $130 shipped

1 new ford pusher fan assembly

Door window motors $30 shipped

Sunroof motors $35 shipped

Most sensors and computers switches-Interior parts marroon

Several console parts red gray tan lids bases tops

5sd tranny out of 89sc and pedals etc

Bunch of 89-92 sc parts,header panel headlights engine stuff

All stated shipping is in the us pricing is negotiable more to come
__________________

ww0001
09-21-2005, 10:54 PM
Following and much more still for sale

1 94 blower and plenum app 70xxx miles $450 + shipping

1 set of NEW aftermarket 94 headlights gave 104 each for them take $130 shipped for the pair

1 set New aftermarket front turn signals cost $40 take $30 each shipped

1 new header panel $75 shipped

1 new air cond condensor $80 shipped

1 140 mph speedo assembly $150 shipped approx. 73000 on clock

1 new auto radiator $130 shipped

1 new ford pusher fan assembly

Door window motors $30 shipped

Sunroof motors $35 shipped

Most sensors and computers switches-Interior parts marroon

Several console parts red gray tan lids bases tops

5sd tranny out of 89sc and pedals etc

Bunch of 89-92 sc parts,header panel headlights engine stuff

All stated shipping is in the us pricing is negotiable more to come
__________________
Still ton of stuff for sale

x182dan
09-21-2005, 11:02 PM
edit whooops

S_Mazza
10-07-2005, 02:20 PM
Edit: Comments removed - see post below.

Zanary
10-07-2005, 02:33 PM
I'd like a price on the clutch pedal assembly...shipped to 87109.

Thanks!

S_Mazza
10-12-2005, 10:31 AM
Edit: Negative comments removed. See post below.

fastang
10-19-2005, 06:35 PM
intrested in heads - how much?

jc91sc
10-20-2005, 08:55 AM
I think ww0001 might be a scam artist. I paid him $85 for some parts, and I haven't heard a whisper from him since then. I tried to contact him several times with no success. My advice is: Don't send him any money.


Wrong thread...OOPS!

JimmyDean
10-20-2005, 10:18 PM
Need stock SC top with unmolested collar nut. If you dont want to unattach them Ill take it with upper IC tube attached. To 85748.

S_Mazza
10-21-2005, 12:23 PM
I was worried that Wayne (ww0001) had scammed me, but he made good on the deal. I received my parts yesterday. It took over a month, but I eventually got what I paid for. So, I hereby retract my previous negative comments.

Sylvanc
03-02-2006, 03:28 PM
Hi,
What do you need for a window motor (90 SC, passenger side)? What would it take to get it to Oregon?
Thanks,
Sylvan

cobraphx
03-07-2006, 07:09 PM
I'd be interested in the IRS spindles/knuckles and the rear abs sensors and brackets.

Thanks,
-Matt

BLUNDERBIRD
03-27-2006, 01:36 PM
any clutch/break assemplies out there, please PM me. trying to build a sc the hard way

1 BAD T
04-13-2006, 02:05 PM
If so how much? Thanx Tony

mc94xr7
07-01-2006, 10:33 AM
5.0 motor mounts?:eek:

T-bird Tim
07-01-2006, 03:44 PM
I would be interested in a complete brake assembly from a 93 and up sc. Only need the booster assembly and everything that goes with it to include the brake lines, I dont anything such as the calibers or rotors. I want to convert my 92 brake system to a later model and need all that it requires to do this. Thanks

SC95Stang
07-10-2006, 10:00 AM
Do you have any 94-95 balancers and/or timing chain covers?

curse
07-12-2006, 11:46 AM
Do you have a DIS module for the 94 SC and if so how much