Removing body molding adhesive

Jeremy_K

Registered User
Well I pulled all of my body moldings off the sides of my car cause they looked like ~~~. Now I need to find a good adhesive remover that doesn't eat paint. It's the foam tape type adhesive.Anyone have any ideas on where to get some and what kind? Thanks
 
if you have a heat gun run that along the adhesive for about 30 seconds to a minute about 6 - 8 inches from the surface and if you can find plastic razor blades or something firm enough to scrap it off. Once the gunk is heated it comes off much easier, but be extra careful so as to not ruin your paint.

Drew
 
Back
Top