I am going to buy the new 85mm C&L Tuner MAF
And either #50 or #60lb injectors,from Supercoupe
Unlimited.And I need to buy a air-filter to fit up to.
I will be running a 85mm MP throttle body,3.5 air tube.
With a MagIII,This will be on a stock long block.
Then I will be switching to a A/R blower,right after
the shootout.Then I will be running with welded heads
,cam,etc.So I would like to buy the right size injectors
to run now that will work good later.So I am not sure
if I should go with the #50 or #60lb injectors.
I do not know if my #42 injectors would be big enough
for the MagIII with stock block ,for now,for the Shootout.
Any insight on this.
The parts I have now,and can run are,76MM C&L MAF
3.5 Air tube,BBK 75mm Throttle body.#42lb injectors.
I will be bolting on a MagIII this next week.I have a
MPII on now.I don't know if my injectors are big enough
for the magIII.Would it be best to just install the MagIII
with my setup now? injector#42,maf 76,tb75,ect
would I be running to lean?
Thanks Randy