80mm MAF Swap

Rich Thomson

Registered User
Since a few have asked me I thought I would post additional info on installing a stock 80mm MAF from a Lincoln Mark VIII, Crown Vic, or Mustang into your Thunderbird. I have a How-To article on the 80mm Intake setup already posted. To add to the article you can pull the electronics from your stock MAF and swap it into the 80mm MAF. Your MAF curve is not affected as to cause driveability problems. :cool: Either the Aluminum or Black Plastic MAF will work. I found several 80mm MAF's and adapters cheap on Ebay. Search on Ford Mass Air Sensor. These meters all have the sampling tube post going through the center.

Rich

5e_1_b.JPG

a8_1_b.JPG

Adapter_Explorer.jpg
 
Last edited:
Back
Top