Rear hub swap

quick35th

Registered User
This has probably been descussed millions of times but I am way to sleepy right now to search around. Anyways, how do I change out the rear hubs so I can have the 5x4.50" bolt pattern? Are they pressed in and will require me to take the entire assembly to a machine shop and have the old hub pressed out and the new one pressed in?

Shane
 
when i did mine i replaced the bearing along with the new hub.you'd hate to do all that work to have an old bearing fail on you. if you have abs brakes make sure you get the front hubs with the abs rings.i retained my stock brake setup by redrilling my rotors to a 4.5" bolt pattern
 
Back
Top