Looking for someone who........

Has similar mods I have and how it does performance wise.

I rebuilt my motor (has 0 miles as of now) bored .020 over with total seals

212/220, .531/.539 lift, on a 114 lsa cam
1.73 RR's
ported stock valve heads
sct chip
MP inlet with ported blower
80mm C&L MAF
2.5-3-2.5 catless exhaust
5% pulley
42# injectors/255walbro
5spd

Any feedback is appreciated

Thanks

300rwhp should be about right. You'll have to get it tuned though.

I made the numbers in my sig (269rwhp/388rwtq) with an intake, exhaust, pulley,MP inlet, ported blower (stock outlet).

I figured ported stock valve heads and a cam would be atleast 30rwhp increase, so that seems right.

Also, I never ran my car with those hp numbers, what do our cars usually run with 270 or so HP?

I wouldnt expect anything less than 300. Sounds like a pretty trick bird.

1QuikV6 said:

I wouldnt expect anything less than 300. Sounds like a pretty trick bird.

Click to expand...

I'll be happy if it does