Dyno And Track #'s

SweetSc

Registered User
well we started out at 228/320.

4 pulls later we finished at 288rwhp/350trq.

I Will Scan and post the chart later.... Was still making 300 ft lbs @ 5000rpms


My one and only track run...

14.211 @ 99.94


Chris

p.s. This was in 95+ degree weather.....

Mods:

Stegimeir Ported Heads
Stegimeir Ported Lower Intake
Stegimeir Cam
Ported Stock Exhaust Manifolds
mn12 perf Exhaust without cats (2 1/2" center pipe)
Borla Mufflers
5% sc od pulley
Mildly Ported Blower
Mildly ported Inlet
3/4" Raised Top
Wrapped Lower IC Tube
IC Fan
80mm L-maf
Zr Intake
42# Lucas Injectors
160 Stat
Custom Dyno Tune (ford chips)
1.73 Roller Rockers
Trickflow Pushrods
Stock Bottom End


Added Since Dyno run...

10% sc od pulley
75mm TB
dyno.jpg
 
Last edited:
I'd throw a 10% pulley on that bad boy fast. You've got enough fuel and flow to definatly see a gain from some increased boost.


Even better would be the quick change pulley set from ESM with the 18% pulley.

Doh!! I just saw you already added the 10% pulley. I bet you could use the 18% one though without fear.

Nice numbers, keep up the good work.
 
Hmm, if you have a 10% sc pulley and a 5% jackshaft pulley, I wonder if that would be worth anything. Next time you come down we will try it on the dyno.

After I drive your SC, I almost thought about modding mine for a second ;) That car pulls like a SOB
 
Back
Top