motor mounts

wow what a job ..............passenger side not to bad .drivers side ugly....got her done both were tottaly gone.still have the clunk in the front end when i turn either direction any ideas? I do have to say its a diferent car with mounts done, so guess im just chipping away at it

Congratulations, motor mounts are one of the harder jobs on a SC. Now, for the steering clunk I'd look at the upper and lower ball joints, strut rod bushings, inner and outer tie rod ends. Good luck, John

The clunks could be the sub frame bolts; there are eight of them four on each side, cured my clunking problem.