PDA

View Full Version : Going to the track


Tsbird1994
07-22-2002, 08:11 PM
Hey guys.... I'm heading to the strip by me in two weeks, and i was wondering what tips you have for getting my E.T.'s down. I've never run the 1/4 mie before and I'm not sure of the best method for launching my automatic. My list of modifications is in my signature. Any tips you could offer on ANYTHING would be appreciated...... :D

Here's a pic of my bird

Joey OKC
07-28-2002, 01:09 AM
ON the last yellow light Mash the gas!

007_SuperCoupe
05-27-2003, 01:36 PM
I just went for the first time this weekend my self. I ran 22 psi in my rear tires. It helped with traction but the still spun a little. I was power braking at the start and had my rpms just below where my tires would start spinning. For me that is somewhere in the 1800 range. Anything higher and I'd be spinnign the tires. Drive around the water in the burn-out area. You don't need it because it will just make your tires loose traction. Other than that, pedal to the medal and enjoy the ride. I did!