PDA

View Full Version : Anyone installed Super Six Heads



Rich Thomson
10-15-2005, 07:34 AM
Looking for feedback if anyone has purchased a set of the stage two or three heads from Super Six Motorsports for the SC. Stage Three looks to be the direction I want to go.

Rich


89-98 Ford 3.8 V6 Mustang SuperCoupe T-Bird Cougar Taurus
Stage 2: Fully ported intake and exhaust ports, complete bowl work,
1.78/1.45 valves, valve job, .54 lift valve springs , custom retainers, valve
seals, surfaced, assembled and ready to install: $950* 203 CFM intake/154
CFM exhaust.
Stage 3 SuperHeads: Stage 2 plus additional special porting, high polished
chambers and exhaust ports, exact fit 1.86 intake and 1.56 stainless exhaust
valves, .54 valve springs : $1200* 228 CFM intake/189 CFM exhaust.
.83 exhaust-intake flow ratio, best bang for the buck 3.8 head on the market
Milling .010, .020, .030, no charge!
* $120 refundable core

BlackbirdSC
10-16-2005, 10:04 PM
Rich, check with Doug Fraleigh, I think he has heads done by SSM. I sold him a Comp reground cam and a pair of 95 heads I had a couple years ago. He's still around somewhere... :)


Looking for feedback if anyone has purchased a set of the stage two or three heads from Super Six Motorsports for the SC. Stage Three looks to be the direction I want to go.

Rich


89-98 Ford 3.8 V6 Mustang SuperCoupe T-Bird Cougar Taurus
Stage 2: Fully ported intake and exhaust ports, complete bowl work,
1.78/1.45 valves, valve job, .54 lift valve springs , custom retainers, valve
seals, surfaced, assembled and ready to install: $950* 203 CFM intake/154
CFM exhaust.
Stage 3 SuperHeads: Stage 2 plus additional special porting, high polished
chambers and exhaust ports, exact fit 1.86 intake and 1.56 stainless exhaust
valves, .54 valve springs : $1200* 228 CFM intake/189 CFM exhaust.
.83 exhaust-intake flow ratio, best bang for the buck 3.8 head on the market
Milling .010, .020, .030, no charge!
* $120 refundable core

Toms-SC
10-16-2005, 10:12 PM
Rich;

Give Tom a call at Super Six. He's the man.

Rich Thomson
10-17-2005, 09:51 AM
Thanks for the input guys. I was looking for someone with first hand experience with the Stage two or three heads. Also if someone has a link to pictures and or a tech article I would be interested in it.

Rich

Jason Wild
10-17-2005, 10:28 AM
Rich,
Have you tryed over on V6power.net I'm sure some over there are running them.

Conan56
10-17-2005, 10:29 AM
Rich


I bought a set of supersix heads for around 1000.00. They flowed something like 228 intake and 189 exhaust if i remember correctly (stage 3)
LOL I JUST REALIZED YOU ALREADY HAD FLOW NUMBERS POSTED

I ended up selling them cause I was in a money Bind for a short period ,to a friend that was putting a SC motor in his mustang

He had the following components from what I know

Remanned shortblock bored 30 over
Magnaport 2 blower/inlet (with a lil extra porting)
Spearco Intercooler (it was made for SCs for a short period)
Supersix heads and a Dr Fred cam
75mm tb and a 76mm maf
10% blower pulley

(there may have been other minor mods such as top/underdrives)

I was there when he had it dynoed at Larocca's performance

His dyno numbers were 327rwhp and 401 torque
those numbers ring a bell in my head


The car has performed very well and I would say the heads are a very good buy for the price

Conan56
10-17-2005, 10:33 AM
Rich


I bought a set of supersix heads for around 1000.00. They flowed something like 228 intake and 189 exhaust if i remember correctly (stage 3)
LOL I JUST REALIZED YOU ALREADY HAD FLOW NUMBERS POSTED

I ended up selling them cause I was in a money Bind for a short period ,to a friend that was putting a SC motor in his mustang

He had the following components from what I know

Remanned shortblock bored 30 over
Magnaport 2 blower/inlet (with a lil extra porting)
Spearco Intercooler (it was made for SCs for a short period)
Supersix heads and a Dr Fred cam
75mm tb and a 76mm maf
10% blower pulley

(there may have been other minor mods such as top/underdrives)

I was there when he had it dynoed at Larocca's performance

His dyno numbers were 327rwhp and 401 torque
those numbers ring a bell in my head


The car has performed very well and I would say the heads are a very good buy for the price

I think he may have raised his price since i purchased from him
The price was 1050.00 for the stage 3s
When I purchased the heads from him

danman
10-18-2005, 07:01 PM
I dont have Tom's heads on my car, but I go to his shop regularly and I must say he does fine work. Of course thats why his heads aren't cheap, but they are very nice.